| Vac Motor | 1000 watt |
| Performance - Water Lift | 118" |
| Performance - Airflow | 63 CFM |
| Brush Motor | 300 watt |
| Brush RPM | 3500 RPM |
| Capacity | 6.5 quart |
| Weight | 17 lbs. |
| Noise Level | 66 dBa. |
| Power Cord | 50' |
Demo Nacecare HD18 Upright Vacuum
Our Take (from the SES Sales Team)
“The NaceCare HD 18 is a commercial upright vacuum for carpet care in offices, schools, hotels and other buildings where someone vacuums the same floors every night. What sets it apart from a basic upright is how much it tells the operator. A carpet beater control light glows green when the brush roll is working correctly, turns red if the brush is jammed or overloaded, and shows red and green when the brush is not reaching the carpet, which is the cue to adjust the base height dial or check the belt and roller. A bag full light comes on when the bag needs changing or the suction path is blocked. Filtration runs through the bag, a filter, a washable prefilter and a HEPA filter. An onboard suction hose with an ergonomic handgrip handles edges, corners and above-floor work, and the cord winds onto top and bottom hooks. It is a dry vacuum, so keep it off wet carpet and liquids. As a demo, it is a lightly used way to add an upright to your fleet, so ask us about this unit’s condition.”
A commercial upright with built-in feedback
The NaceCare HD 18 is a commercial upright vacuum for daily carpet care. A powered carpet beater with a status light, a bag full indicator, an adjustable base height and HEPA filtration help operators get consistent results and know when the machine needs attention.
An onboard suction hose with an ergonomic handgrip, top and bottom cord winders and a carry handle round out the design. It runs on a standard grounded 120 V outlet.
Condition: Demo. Light use and priced below new. Ask us about the condition of this unit.
What you get
Know what the vacuum is doing
Dry pickup only
Features
Made for nightly carpet care
- ✓Carpet beater control light shows when the brush is working, jammed or not reaching the carpet
- ✓Bag full light also warns of a blocked suction pipe
- ✓HEPA filter with a washable prefilter
- ✓Base height adjustment dial for different carpet piles
- ✓Replaceable hair-collecting strip, onboard hose and top and bottom cord winders
Specifications
NaceCare HD 18 at a glance
| Models | HD 18 upright vacuum |
|---|---|
| Type | Commercial upright vacuum, dry pickup only |
| Power | 120 V, grounded plug |
| Filtration | Dust bag, filter, washable prefilter, HEPA filter |
| Indicators | Bag full light; carpet beater status light (green / red) |
| Brush height | Adjustable with a base height dial |
| Tools | Onboard suction hose with ergonomic handgrip |
| Cord storage | Top and bottom cord winders |
| Model Numbers | HD 18 |
Technical specs may include optional equipment that is not included with all units.
Demo unit details
Questions
NaceCare HD 18: common questions
What does the red light on the base mean?
Red means the carpet beater is locked or has been overloaded. Lift the base with the height adjuster, stand the vacuum upright for a few seconds and resume. If the red light stays on, switch off, unplug and check for a blockage.
Can it pick up water?
No. The HD 18 is a dry vacuum. Do not use it on wet surfaces or to pick up liquids.
How often should the filters be changed?
NaceCare says to replace or tap clean the filter about every 20 dust bags. The prefilter can be washed with water, dried and reinstalled under the HEPA filter.
Not sure the HD 18 fits your floors?
Tell our team about the carpet, the building and how often you vacuum, and we will help you decide if this is the right upright.
