Our Certified Reconditioning Process
Rebuilt as close to new as possible, at a fraction of the price
A used machine is sold as-is. An SES certified reconditioned machine is stripped down, rebuilt and tested by factory-trained technicians, then backed by our warranty.
Shop ReconditionedShop Demo UnitsDead on arrival? Tell us within 48 hours and we'll send a local tech or bring it back and repair it at our cost. Financing and Net 30 available →
Used vs. SES Certified Reconditioned
| Typical used machine | SES certified reconditioned | |
|---|---|---|
| Condition | Sold as-is, often without knowing if it works properly | Stripped to major components, rebuilt and tested to perform like new |
| Wear parts | Whatever is on the machine | Vac motor, hoses, gaskets, filters, blades, casters, bumper wheels, decals and batteries replaced** |
| Appearance | As found | Cleaned, pressure washed, metal sanded and repainted, tanks heated to remove scuffs where practical |
| Warranty | Usually none | 90 days parts, 30 days labor |
Our Reconditioning Process
- Tear down and cleanMachines are stripped to their major components, then everything is cleaned and pressure washed.
- RefinishMetal parts are sanded and repainted. Tanks are heated to remove scuffs and scratches where practical.
- Replace wear itemsVac motor, hoses, gaskets, filters, blades, casters, bumper wheels, decals and batteries.**
- Rebuild and testMotors are tested and rebuilt as needed, then the unit is assembled, serviced and tested to perform like new.
Engines get a full overhaul too. For example, an LP buffer engine gets an oil change, new oil filter, air filters, recoil filter and spark plugs, an emissions test and a valve adjustment.
Demo Units
Demo units typically have between 1 and 200 hours of use, consistent with display, training or evaluation. They're fully serviced and tested before shipment: a like-new machine at a used price.
Shop demo units →Factory Inspection on Large Tennant Machines
For reconditioned large, industrial Tennant machines, we make every possible effort to have a factory field service technician perform a final operational inspection before the unit ships.
Inside a Rebuild: Tennant ATLV 4300
Why Buy Reconditioned From SES
- We're a factory certified service center for the brands we offer, with access to current parts, schematics, technical data and service data.
- Our reconditioned units have been shipped worldwide.
- Every reconditioned machine comes with a 90-day parts, 30-day labor warranty.
**Some exceptions may apply. See warranty terms.
Reconditioned Equipment Questions
What's the difference between used and reconditioned?
A used machine is sold as it was found. Our reconditioned machines are torn down, cleaned, refinished, fitted with new wear parts, rebuilt and tested by factory-trained technicians, then covered by a 90-day parts and 30-day labor warranty.
How long does reconditioning take?
About 15 hours per machine on average, and up to 80 hours on larger units.
What is a demo unit?
A current machine with light use, typically 1 to 200 hours, from display, training or evaluation. Demo units are fully serviced and tested before they ship.
Find Your Reconditioned Machine
Scrubbers, sweepers, burnishers and more, usually 50% or more off new.
