| Models | ERIClean E531BD |
|---|---|
| Scrubbing and Recovery Systems | |
| Scrub deck type | Disk, single brush |
| Cleaning path | 20 in (51 cm) |
| Brush / pad diameter | 20 in (51 cm) |
| Brush speed | 153 rpm |
| Brush motor | 480 W |
| Brush pressure | 50 / 70 lb |
| Productivity, theoretical | Up to 28,524 sq ft per hour |
| Solution tank capacity | 13 gal (50 L) |
| Recovery tank capacity | 12 gal (45 L) |
| Vacuum motor | 400 W |
| Vacuum power | 1.8 psi (12.5 kPa) |
| Battery and Propulsion System | |
| Voltage | 24 V |
| Propulsion | Traction drive, forward and reverse |
| Drive motor | 150 W |
| Max speed | 3.1 mph (5 km/h) |
| Battery compartment | 13 x 13 x 9 in (34 x 34 x 23 cm) |
| Dimensions and Weight | |
| Length x width x height | 48 x 21 x 42 in (122 x 54 x 106 cm) |
| Width with squeegee | 31 in (78 cm) |
| Gross weight | 417 lb (189 kg) |
| Sound level at 4.9 ft (1.5 m) | Under 68 dB |
| Model Numbers | ERIClean E531BD (SES ERECE531BD-99) |
Technical specs may include optional equipment that is not included with all units.
Demo ERIClean 531BD 20" Traction Walk-Behind Scrubber
Our Take (from the SES Sales Team)
“The E531BD is a 20-inch disk walk-behind with traction drive, so the machine pulls itself and the operator just steers. It is sized for schools, offices, retail and light warehouse floors where a micro scrubber is too small but a rider isn’t needed. ERIClean rates it at up to 28,500 square feet an hour theoretical.
The brush deck and squeegee are aluminum, so they won’t rust, and the brush loads and unloads with the push of a button instead of reaching under the deck. Two brush pressure settings on a foot pedal let you go light on daily cleaning and heavier on soiled floors.
It runs on a 24 V battery system, and this demo unit has 0 hours and new lead acid batteries. It is rated under 68 dB, quiet enough for daytime cleaning.”
A 20 in traction-drive walk-behind for mid-size floors
The ERIClean E531BD is a battery walk-behind floor scrubber with a single 20 in disk brush and a 150 W traction drive, so the machine moves itself forward and back while the operator steers. A 13 gal solution tank and 12 gal tiltable recovery tank keep it cleaning between fills, and ERIClean rates it at up to 28,524 sq ft per hour theoretical productivity.
The rust-resistant aluminum brush deck and squeegee, push-button brush loading, two brush pressure settings (50 or 70 lb) and simple touch panel controls make it a good fit for schools, offices, retail stores, hospitals and light warehouse floors.
Condition: Demo. 0 hours, new lead acid batteries.
What you get
Built for easy, everyday scrubbing
Push-button brush loading
Features
Simple to run, easy to maintain
- ✓Touch panel controls with one-touch operation keep training short for new operators
- ✓Traction drive with forward, reverse and a speed adjuster on the control panel
- ✓Patented brush holder loads and unloads the brush with the push of a button
- ✓Aluminum brush deck and squeegee assembly resist rust
- ✓Detachable squeegee blades change quickly for a clean, dry floor
- ✓Mechanical defoaming system and recovery tank full alarm
- ✓Controller with digital overcurrent and undervoltage protection
- ✓Noise reduction system keeps it under 68 dB for daytime cleaning
Choosing a drive
Traction drive or pad assist?
| Traction drive (E531BD, this unit) | Pad assist (E531B) | |
|---|---|---|
| How it moves | Drive motor propels the machine forward and in reverse | Brush rotation helps pull the machine; the operator guides it |
| Top speed | Up to 3.1 mph | Operator pace |
| Scrub path and tanks | 20 in, 13 / 12 gal | 20 in, 13 / 12 gal |
| Best fit | Larger areas and longer runs where pushing gets tiring | Smaller areas and shorter runs |
Prefer pad assist? See the Demo ERIClean E531B 20 in Pad Assist Walk-Behind Scrubber.
Specifications
ERIClean E531BD at a glance
| Spec | ERIClean E531BD |
|---|---|
| Cleaning path | 20 in (51 cm) |
| Productivity, theoretical | Up to 28,524 sq ft per hour |
| Solution / recovery tanks | 13 gal (50 L) / 12 gal (45 L) |
| Brush speed | 153 rpm |
| Brush pressure | 50 / 70 lb |
| Max speed | 3.1 mph (5 km/h) |
| Voltage | 24 V |
| Sound level at 4.9 ft (1.5 m) | Under 68 dB |
| Model numbers | ERIClean E531BD |
Specifications from ERIClean. Technical specs may include optional equipment that is not included with all units.
Demo unit details
Not sure the E531BD fits your floors?
Call 800-440-6723 and tell us about the floor, the building and the shift. We will tell you if this is the right machine. Service and warranty help
