| Models | Advance SC6000 40D EcoFlex |
|---|---|
| Scrubbing and Recovery Systems | |
| Scrub deck type | Disc, off-set |
| Scrub path | 40 in (102 cm) |
| Scrub brush size | 2 x 20 in (51 cm) |
| Scrub brush speed | 250 rpm |
| Brush motor power | 2 x 1 hp |
| Solution / recovery tank capacity | 50 gal / 50 gal (190 L) |
| Max scrubbing coverage | 103,850 sq ft per hour |
| Detergent management | EcoFlex |
| Vacuum motor | 0.8 hp (0.6 kW), dual vac optional |
| Sealed waterlift | Single vac 57 in (145 cm); dual vac 63 in (160 cm) |
| Battery and Propulsion System | |
| Battery voltage | 36 V |
| Propulsion system | Variable speed AC brushless drive |
| Propel speed forward | 5.6 mph (9 km/h) |
| Propel speed reverse | 2.6 mph (4.2 km/h) |
| Propel motor (peak) | 1.6 hp (1.2 kW) |
| Gradeability, transport at gross weight | 18.5% (10.5 degrees) |
| Gradeability, scrubbing | 12.2% (7 degrees) |
| Dimensions/Weight/Sound | |
| Length | 70 in (178 cm) |
| Width | 46 in (117 cm) |
| Width with squeegee | 48.5 in (123 cm) |
| Height | 62.3 in (158 cm) |
| Minimum aisle turn | 79.5 in (202 cm) |
| Weight, empty | 1,784 lb (810 kg) |
| Gross vehicle weight | 2,359 lb (1,070 kg) |
| Sound level | 69 dBA |
| Model Numbers | Advance 56118123 (SC6000 40D EcoFlex) |
Technical specs may include optional equipment that is not included with all units.
Demo Advance SC6000 40D EcoFlex Rider Scrubber
Our Take (from the SES Sales Team)
“The SC6000 40D is the disk version of Advance’s big rider, built for warehouses, distribution centers, manufacturing and other large open floors. Two 20-inch disk brushes cover a 40-inch path, Advance rates it at up to 103,850 square feet an hour, and the 50-gallon solution and recovery tanks keep it working between dumps.
The off-set deck reaches close to walls and into corners, the click-on brushes and tool-free squeegee blades make daily changes quick, and SmartFlow matches solution flow to travel speed to cut water and chemical use. This unit also has EcoFlex, so an operator can scrub with water for routine cleaning and add detergent only where the floor needs it.
It is a big machine: 46 inches wide, 2,359 lb at gross weight, and it needs a 79.5-inch aisle to turn. If your floors are textured or you want to sweep as you scrub, look at the 36-inch cylindrical SC6000 instead.”
A 40 in disk rider for big, open floors
The Advance SC6000 40D is a ride-on floor scrubber for warehouses, distribution centers, manufacturing plants and other large indoor floors. Two 20 in disk brushes scrub a 40 in path, and Advance rates it at up to 103,850 sq ft per hour of scrubbing coverage, the highest of the three SC6000 decks. 50 gal solution and recovery tanks keep it cleaning between fills.
This unit is equipped with EcoFlex, Advance’s detergent management system, and runs on a 36 V battery system with a variable speed AC brushless drive. The off-set scrub deck reaches close to walls and into corners, and all scrubbing functions sit right at the steering wheel.
Condition: Demo. Inspected by SES technicians.
What you get
Configured for large, smooth floors
EcoFlex: use water when the floor allows, detergent when it does not
Features
Built to run every shift
- ✓40 in disk deck with two 20 in brushes for high-coverage scrubbing on smooth floors
- ✓EcoFlex and SmartFlow match water and detergent to the job and the travel speed
- ✓Intermittent solution-off reduces water in turns for safer cleaning results
- ✓Off-set deck, fully protected by steel doors, cleans close to edges
- ✓Tool-free design and click-on disk brushes speed up brush and squeegee blade changes
- ✓Water level, battery charge and scrub system meters right at the steering wheel
- ✓Optional right side broom with DustGuard misting to keep side broom dust down
Choosing a deck
Disk or cylindrical?
| Disk (this unit) | Cylindrical (SC6000 36C) | |
|---|---|---|
| Deck width | 40 in | 36 in |
| Max scrubbing coverage | 103,850 sq ft/hr | 93,450 sq ft/hr |
| Brush speed | 250 rpm | 760 rpm |
| Best fit | Smoother floors such as sealed concrete and tile | Textured, uneven and grout-heavy floors |
| Debris pickup | No debris hopper; optional side broom | 0.43 cu ft hopper collects light debris while scrubbing |
Specifications
Advance SC6000 40D at a glance
| Spec | SC6000 40D with EcoFlex |
|---|---|
| Scrub path | 40 in (102 cm) |
| Brushes | 2 x 20 in disk, 250 rpm |
| Brush motors | 2 x 1 hp |
| Solution / recovery tanks | 50 gal / 50 gal (190 L) |
| Max scrubbing coverage | 103,850 sq ft per hour |
| Sealed waterlift | Single vac 57 in (145 cm); dual vac 63 in (160 cm) |
| Length x width x height | 70 x 46 x 62.3 in (178 x 117 x 158 cm) |
| Weight, empty / gross | 1,784 lb (810 kg) / 2,359 lb (1,070 kg) |
| Sound level | 69 dBA |
| Model numbers | Advance 56118123 (SC6000 40D EcoFlex) |
Specifications from Nilfisk and Advance. Technical specs may include optional equipment that is not included with all units.
Demo Unit Details
Not sure the SC6000 40D fits your floors?
Call 800-440-6723 and tell us about the floor, the building and the shift. We will tell you if this is the right machine. Service and warranty help | Financing
