| Models | SC6000 36C |
| Scrub Deck Type | Cylindrical |
| Cleaning Path | 36 in (91 cm) |
| Brush Size | 36 x 7.1 in |
| Brush Speed | 760 rpm |
| Brush Motor Power | 2 x 1 hp |
| Solution / Recovery Tank Capacity | 50 gal (190 L) |
| Max Scrubbing Coverage | 93,450 sq ft per hour |
| Debris Hopper Capacity | 0.43 cu ft (12.2 L) |
| Vacuum Motor | 0.8 hp (0.6 kW), dual vac optional |
| Waterlift (sealed) | Single vac 57 in (145 cm); dual vac 63 in (160 cm) |
| Battery, Runtime | 36 V, 312 Ah AGM, up to 3.5 hours |
| Charger | Onboard |
| Propulsion System | Variable speed AC brushless drive |
| Travel Speed, Forward | 5.6 mph (9 km/h) |
| Travel Speed, Reverse | 2.6 mph (4.2 km/h) |
| Propel Motor (peak) | 1.6 hp (1.2 kW) |
| Gradeability, Scrubbing | 12.2% (7 degrees) |
| Length | 70 in (178 cm) |
| Width | 46 in (117 cm) |
| Width with Squeegee | 48.5 in (123 cm) |
| Height | 62.3 in (158 cm) |
| Minimum Aisle Turn | 79.5 in (202 cm) |
| Weight, Empty | 1,784 lb (810 kg) |
| Gross Vehicle Weight | 2,359 lb (1,070 kg) |
| Sound Level | 69 dBA |
| Model Numbers | SC6000 36C ECOFL 312AH AGM OBC (56116957) |
Technical specs may include optional equipment that is not included with all units.
Demo Advance SC6000 36C 36" Cylindrical Rider Floor Scrubber w/ EcoFlex 312AH AGM OBC
Our Take (from the SES Sales Team)
“The SC6000 36C is built for big floors that are rough on a machine: textured concrete, grout lines, tire tracks and the dust that collects along racking. The 36 in cylindrical deck scrubs and sweeps in one pass, so light debris goes into the hopper instead of getting pushed ahead of the squeegee, and the 50 gal solution and recovery tanks keep the machine cleaning instead of running back to the dump. Nilfisk rates it at up to 93,450 sq ft per hour of scrubbing coverage. This configuration adds EcoFlex, so an operator can run on water for routine cleaning and bring in detergent only where the floor calls for it, and the onboard charger means you plug in wherever it parks with no battery watering. If your floors are smooth and polished, a disk deck is usually the better fit. If they are textured or heavily soiled, the cylindrical deck is the one to look at.”
A 36 in cylindrical rider that scrubs and sweeps in one pass
The Advance SC6000 36C is a ride-on floor scrubber for warehouses, distribution centers, manufacturing plants and other large indoor floors. Two cylindrical brushes scrub a 36 in path while an onboard hopper collects light debris, so one pass scrubs and sweeps. 50 gal solution and recovery tanks keep it cleaning between fills, and Nilfisk rates it at up to 93,450 sq ft per hour of scrubbing coverage.
This configuration pairs the EcoFlex detergent management system with 36 V, 312 Ah AGM batteries and an onboard charger, so there are no batteries to water and no separate charger to move around.
Condition: Demo. 0 hours, new in crate.
What you get
Configured for big, tough floors
EcoFlex: use water when the floor allows, detergent when it does not
Features
Built to run every shift
- ✓Cylindrical dual-brush deck scrubs and sweeps in one pass, with a 0.43 cu ft debris hopper
- ✓EcoFlex and SmartFlow match water and detergent to the job and the travel speed
- ✓SmartKey access levels and a OneTouch digital display keep operation simple and consistent
- ✓Impact detection, a heavy-duty front bumper and a tubular frame protect the machine in busy buildings
- ✓Tool-free maintenance, click-on brushes and an offset scrub deck for reaching edges
Choosing a deck
Cylindrical or disk?
| Cylindrical (this unit) | Disk (SC6000 34D and 40D) | |
|---|---|---|
| Deck width | 36 in | 34 in or 40 in |
| Best fit | Textured, uneven and grout-heavy floors | Smoother floors such as sealed concrete and tile |
| Debris | Collects light debris in a 0.43 cu ft hopper while it scrubs | See the disk model’s spec sheet |
Prefer a disk deck? See the Demo Advance SC6000 40D 40 in Disc Rider Scrubber.
Specifications
Advance SC6000 36C at a glance
| Spec | SC6000 36C with EcoFlex, onboard charger |
|---|---|
| Scrub path | 36 in (91 cm) |
| Brush speed | 760 rpm |
| Brush motors | 2 x 1 hp |
| Solution / recovery tanks | 50 gal / 50 gal (190 L) |
| Max scrubbing coverage | 93,450 sq ft per hour |
| Sealed waterlift | Single vac 57 in (145 cm); dual vac 63 in (160 cm) |
| Length x width x height | 70 x 46 x 62.3 in (178 x 117 x 158 cm) |
| Weight, empty / gross | 1,784 lb (810 kg) / 2,359 lb (1,070 kg) |
| Sound level | 69 dBA |
| Model numbers | Advance 56116957 (SC6000 36C ECOFL OBC) |
Specifications from Nilfisk and Advance. Technical specs may include optional equipment that is not included with all units.
Demo unit details
Not sure the SC6000 fits your floors?
Call 800-440-6723 and tell us about the floor, the building and the shift. We will tell you if this is the right machine. Service and warranty help
