| Models | U.S. Products Pegasus Pro 500C SV/SC Package |
| Heater | None (non-heated) |
| Pump Pressure | 50-500 PSI, adjustable (piston pump with pressure unloader) |
| Vacuum Motor | One 5.7 in 3-stage, top-mounted |
| Airflow | 107 CFM |
| Water Lift | 137 in |
| Solution Tank | 12 gal |
| Recovery Tank | 12.5 gal |
| Vacuum Shut-Off | Ball float |
| Vacuum Inlet | 1.5 in or 2.0 in (two versions) |
| Power Cord | One 25 ft, 12/3 |
| Amp Draw | 15 A |
| Voltage | 120 V |
| Wheels | 4 in front casters, 12 in non-marking rear wheels |
| Drain | Drain hose |
| Dimensions (L x W x H) | 32 x 24 x 38.5 in |
| Included Wand | 13 in Sharp Shooter (05-10030), 13 in cleaning path, 6.5 lb |
| Wand Construction | Rotationally molded head, powder-coated 1.5 in 6061-T6 aluminum tube, stainless steel 2-jet manifold |
| Wand Jets | #1 jets installed (300-500 PSI); two #1.5 jets included (100-300 PSI) |
| Included Hose | 25 ft hose set |
| Model Numbers | 05-10039-P (machine 05-10039, 13 in Sharp Shooter wand 05-10030, 25 ft hose set) |
Technical specs may include optional equipment that is not included with all units.
New U.S. Products Pegasus Pro 500C SV/SC Carpet Extractor with 13" Sharp Shooter Wand & 25' Hose
Our Take (from the SES Sales Team)
“This kit puts the single-cord Pegasus Pro 500C SV/SC together with U.S. Products' 13-inch Sharp Shooter wand and a 25-foot hose set. It's a good match for crews who often get only one outlet on a job and want a complete, matched setup for commercial carpet without a heater.
The machine runs on one 25-foot, 15-amp cord, with a pump that adjusts from 50 to 500 PSI and a single 3-stage vacuum motor rated at 137 inches of lift and 107 CFM. The Sharp Shooter has a powder-coated aluminum tube, a stainless manifold with #1 jets installed for 300 to 500 PSI, and spare #1.5 jets for low-pressure cleaning from 100 to 300 PSI, so it can be set up for lighter work too.
The single motor gives up airflow: 107 CFM against 200 CFM on the dual-vac Pro 500C DV/DC. If your crews run long hoses or need faster drying on big floors, step up to the dual-vac kit.”
Single-cord Pegasus Pro 500C SV/SC with a 13 in Sharp Shooter wand and hose set.
This U.S. Products package pairs the single-cord, non-heated Pegasus Pro 500C SV/SC with a 13 in Sharp Shooter carpet wand and a 25 ft hose set. The extractor runs from one 25 ft, 15 A cord, with an adjustable 50-500 PSI piston pump and a single 3-stage vacuum motor rated at 137 in of lift and 107 CFM.
The Sharp Shooter 13 in wand has a rotationally molded head with a composite glide and airtight gasket seal, a powder-coated 1.5 in aluminum tube and a stainless steel manifold. It comes with #1 jets installed for 300-500 PSI and two #1.5 jets for 100-300 PSI cleaning. The machine holds 12 gal of solution and 12.5 gal of recovery.
Includes:
- Pegasus Pro 500C SV/SC extractor
- 25 ft power cord
- Priming hose
- 13 in Sharp Shooter wand with spare #1.5 jets
- 25 ft hose set
Features:
- Includes 13 in Sharp Shooter wand and 25 ft hose set
- Single 25 ft 12/3 cord at 15 A
- 50-500 PSI piston pump with pressure unloader
- Single 3-stage vacuum motor, 137 in of lift and 107 CFM
- 12 gal solution and 12.5 gal recovery tanks