| Models | U.S. Products Pegasus Pro 500C DV/DC |
| Heater | None (non-heated) |
| Pump Pressure | 50-500 PSI, adjustable (piston pump with pressure unloader) |
| Vacuum Motors | Two 5.7 in 3-stage, top-mounted in parallel |
| Airflow | 200 CFM |
| Water Lift | 100 in |
| Solution Tank | 12 gal |
| Recovery Tank | 12.5 gal |
| Vacuum Shut-Off | Dual ball float |
| Vacuum Inlet | 1.5 in or 2.0 in (two versions) |
| Power Cords | Two 25 ft, 12/3 |
| Amp Draw | 15 A per cord |
| Voltage | 120 V |
| Wheels | 4 in front casters, 12 in non-marking rear wheels |
| Drain | Drain hose |
| Dimensions (L x W x H) | 32 x 24 x 38.5 in |
| Model Numbers | 05-10038 (machine only) |
Technical specs may include optional equipment that is not included with all units.
New U.S. Products Pegasus Pro 500C DV/DC Carpet Extractor
Our Take (from the SES Sales Team)
“The Pegasus Pro 500C DV/DC is the non-heated, dual-vac, dual-cord version of U.S. Products' Pro 500. It fits crews who rely on pre-spray chemistry and agitation rather than heat, and want strong recovery on commercial carpet without a heater. The pump adjusts from 50 to 500 PSI, so the same machine can run a carpet wand or turn down for upholstery.
Two top-mounted 3-stage vacuum motors run in parallel for 200 CFM and 100 inches of lift. The 12-gallon solution and 12.5-gallon recovery tanks give longer runs between fills, and the body has the same 32 by 24 by 38.5-inch footprint as the heated model. This listing is the machine only; the wand and hose set are separate.
The trade-offs are simple. Without a heater, any warmth comes from the water you add, and U.S. Products says to keep that under 120°F. You'll also need two circuits for the two 15-amp cords; if one outlet is all you get, look at the Pro 500C SV/SC.”
Non-heated, dual-vac, dual-cord portable extractor for commercial carpet.
The Pegasus Pro 500C DV/DC is the non-heated, dual-vac, dual-cord model in U.S. Products' Pro 500 line. Its piston pump with pressure unloader adjusts from 50 to 500 PSI for carpet and upholstery. Two 25 ft 12/3 cords draw 15 A each, and U.S. Products builds the machine with a 1.5 in or 2.0 in vacuum inlet.
Two 5.7 in, 3-stage vacuum motors are top-mounted in parallel for 200 CFM and 100 in of lift, with dual ball float shut-offs. The 12 gal solution tank and 12.5 gal recovery tank sit in a 32 x 24 x 38.5 in rotationally molded body on 12 in non-marking rear wheels and 4 in front casters. A drain hose empties the recovery tank.
Includes:
- Pegasus Pro 500C DV/DC extractor
- Two 25 ft power cords
- Priming hose
Not included: Wand and hose set, sold separately
Features:
- 50-500 PSI piston pump with pressure unloader
- Two 3-stage vacuum motors, 200 CFM and 100 in of lift
- Two 25 ft 12/3 cords at 15 A each
- 12 gal solution and 12.5 gal recovery tanks
- Available with a 1.5 in or 2.0 in vacuum inlet