| Vacuum/Motor | Dual 6.6 2-Stage Vacuum Motor In-Parallel | 136" Lift | 240 CFM | ||
| Pump | 53 GPM Dump Rate Through Included 1.5" 50' Dump Hose | ||
| Dump Hose Connection | Banjo Quick-Release | ||
| Capacity | 18 Gallon | ||
| Filter Basket | 6"x8" | Located Under 2" Vacuum Inlet | ||
| Shut Off | Ball Float | ||
| Wheels | 3" Front Castors, 8" Rear Non-Marking | ||
| Dimensions | Length - 31'' Width - 22'' Height - 42'' | ||
| Weight | 138lbs | ||
| Power Cords | 2 each 25', 15amps/ea | ||
| Warranty | 10-year limited housing, 2-year major components, 90-day limited wear parts |
New U.S. Products Kraken Flood Pump Extractor
Our Take (from the SES Sales Team)
“The Kraken is built for water restoration crews and facility teams who deal with floods, burst pipes and backed-up drains. Its job is to move a lot of water fast. Two 6.6 in 2-stage vacuum motors run in parallel for 136 in of lift and 240 CFM, and the auto-dump pump empties the tank at 53 GPM through a 1.5 in, 50 ft dump hose, so you can keep extracting instead of stopping to dump. Each motor has its own cord with a 15 A maximum, so it runs on standard circuits without hunting for a 20 A breaker. Each motor also has its own check valve and air ducting, and the cooling fan and mufflers keep it quieter. The 18 gal tank shuts off on dual ball floats, and an electronic float control lets it cycle between vacuum and pump-out, which also makes it work as a sump pump. Use it with a water claw or flood wand on carpet, or straight off the hose for standing water. U.S. Products builds it in the USA.”
A dual-motor flood pumper with auto dump
The U.S. Products Kraken 6.6 is a professional flood pumper extractor for water restoration and flood cleanup. Dual top-mounted 6.6 in 2-stage vacuum motors, wired in parallel, deliver 136 in of water lift and 240 CFM, and a 53 GPM auto-dump pump empties the tank through a 1.5 in, 50 ft dump hose while you keep working.
The 18 gal tank shuts off with dual 1.5 in ball floats, an electronic float control cycles the machine between vacuum and pump-out, and two 12/3 power cords draw a maximum of 15 A each. It stands 41.5 in tall and weighs 138 lb.
Condition: New.
What you get
Ready for water removal
Two cords, standard circuits
Features
Built to keep extracting
- ✓Cycle feature for sump pump use: vacuum pauses until the tank pumps down, then restarts
- ✓Built-in vacuum relief valve
- ✓4 in vacuum motor cooling fan and mufflers for major sound reduction
- ✓Banjo quick-release dump hose connections
- ✓Works with flood tools such as a water claw or wand for pure extraction
Specifications
U.S. Products Kraken 6.6 at a glance
| Models | Kraken 6.6 Flood Pumper |
|---|---|
| Vacuum motors | Dual 6.6 in 2-stage, in parallel |
| Water lift | 136 in (345 cm) |
| Airflow | 240 CFM (6.8 m³/min) |
| Auto-dump pump | 53 GPM (200 L/min), 1.5 in discharge |
| Dump hose | 1.5 in x 50 ft (38 mm x 15 m) |
| Vacuum inlet | 2 in (51 mm) |
| Tank capacity | 18 gal (68 L) to ball float activation |
| Vacuum shutoff | Dual 1.5 in ball floats |
| Float control | Electronic, cycles between vacuum and auto dump |
| Power | Dual 12/3 cords, 15 A max per cord |
| Height | 41.5 in (105 cm) |
| Weight | 138 lb (63 kg) |
| Model Numbers | 05-10035 (Kraken 6.6 Flood Pumper) |
Technical specs may include optional equipment that is not included with all units.
Questions
U.S. Products Kraken: common questions
Do I need a 20 A circuit?
No. Each of the two power cords draws a maximum of 15 A. U.S. Products specifies 12/3 extension cords no longer than 50 ft.
Can it be used as a sump pump?
Yes. The cycle feature pauses the vacuum until the tank pumps down to a safe level, then restarts it, and it can run on one power cord in sump pump use.
How fast does it pump out?
The auto-dump pump discharges at 53 GPM through the supplied 1.5 in, 50 ft dump hose.
What maintenance does it need?
Always run with the filter basket in place and empty it after use, and run clean water through the pump after each job to clear contaminants from the impeller.
Not sure the Kraken fits your jobs?
Tell our team about the water jobs you handle and the power you have on site, and we will help you decide if this is the right machine.
