Neptune 1200 Cold, Dual Vac, Dual Cord, Multi-Surface - Includes Revolver XP & 25' Hose Set
Our Take (from the SES Sales Team)
“The Neptune 1200 package is built for hard-surface work: tile and grout, stone, smooth concrete and other floors where a mop just moves the soil around. The piston pump adjusts from 400 to 1,200 PSI, and the package includes the Revolver XP hard-surface tool, whose rotating spray arm cleans a 12 in path while the tool's vacuum pulls the dirty water straight back. Dual 3-stage vacuum motors deliver 180 in of water lift and 107 CFM, per U.S. Products. The 15 gallon tanks are paired with auto fill and auto dump, so a garden hose keeps the solution tank topped up and the dump pump empties the recovery tank without lifting or tipping. U.S. Products says the newer dump pump cuts cycle time by 70 percent compared with the old model. The Revolver XP comes with a brush ring and a hard boot ring, and a 25 ft hose set completes the package. Plan for two outlets, since the machine runs on two cords at 15 amps each. For carpet-only work, a Neptune or Cobra carpet extractor is the better fit.”
A high-pressure hard-surface extractor, packaged with a spinner tool
The U.S. Products Neptune 1200 is a portable multi-surface extractor for tile and grout, stone, smooth concrete and other hard floors. A piston pump adjusts from 400 to 1,200 PSI, dual 3-stage vacuum motors deliver 180 in of water lift and 107 CFM, and the solution and recovery tanks each hold 15 gallons, with auto fill and auto dump.
This package adds the Revolver XP hard-surface tool and a 25 ft hose set. The machine runs on two cords at 15 amps each.
Condition: New.
What you get
Machine, hard-surface tool and hoses
25 ft hose set, included
Auto fill and auto dump
Features
Built for hard-surface restoration
- ✓Adjustable 400 to 1,200 PSI piston pump for tile, grout, stone and smooth concrete
- ✓Dual 3-stage vacuum motors rated at 180 in of lift and 107 CFM
- ✓Auto fill from a garden hose, with an internal valve that prevents overfilling
- ✓Auto dump pump empties the recovery tank without lifting or tipping
- ✓Pressure gauge and adjustment knob on the machine, plus an easy-to-reach exterior pressure relief valve
Specifications
U.S. Products Neptune 1200 at a glance
| Models | Neptune 1200 with Revolver XP tool and 25 ft hose set |
|---|---|
| Type | Portable multi-surface extractor, non-heated |
| Pump | Piston pump, adjustable 400 to 1,200 PSI (27.6 to 82.7 bar), with pressure gauge |
| Vacuum | Dual 3-stage motors, 180 in (457 cm) water lift, 107 CFM (3.0 m³/min) |
| Solution / recovery tanks | 15 gal (56.8 L) / 15 gal (56.8 L) |
| Auto fill | Garden hose connection; internal valve stops the fill when the tank is full |
| Auto dump | Built-in dump pump empties the recovery tank through a hose |
| Vacuum shut-off | Ball float |
| Drain | 24 in (61 cm) drain hose |
| Wheels | 4 in (10 cm) front casters, 12 in (30 cm) non-marking rear wheels |
| Power | 120 V, dual cords, 15 A per cord |
| Dimensions (L x W x H) | 24 x 23.5 x 36.75 in (61 x 60 x 93 cm) |
| Weight | 140 lb (64 kg) |
| Tool | Revolver XP, 12 in (30 cm) cleaning path, 57 x 25 x 7 in (145 x 64 x 18 cm), 25 lb (11 kg) |
| Hose set | 25 ft (7.6 m) pressure and vacuum hoses |
| Model Numbers | 05-10012-P (Neptune 1200, Revolver XP tool, 25 ft hose set) |
Technical specs may include optional equipment that is not included with all units.
Questions
Neptune 1200: common questions
What comes in this package?
The Neptune 1200 extractor, the Revolver XP hard-surface tool with a brush ring and a hard boot ring, and a 25 ft hose set with pressure and vacuum hoses.
What does the Revolver XP clean?
U.S. Products designed it for tile, grout, stone, smooth concrete and other hard surfaces. Its #2 spray jets ride on a rotating arm, and the ergonomic handles allow side-to-side and front-to-back cleaning.
What surfaces is the Neptune 1200 for?
U.S. Products designed it as a multi-surface extractor for hard surfaces such as tile and grout, stone and smooth concrete, with pressure adjustable from 400 to 1,200 PSI.
What power does it need?
Two grounded outlets. It runs on two cords at 15 amps per cord, and U.S. Products says not to connect both cords to the same outlet. Any extension cord should be 12/3 and no longer than 50 ft.
How do auto fill and auto dump work?
Connect a garden hose to fill the solution tank; an internal valve stops the water when the tank is full. To empty the recovery tank, connect a hose to the pump outlet and turn on the dump pump.
Not sure which Neptune fits your work?
Tell our team what you clean, how big the jobs are and what power you have on site, and we will help you decide if this is the right machine.
