Cobra 10.0 220 Cold, Single Vac, Single Cord - Includes 13" Trident Wand & 15' Hose Set
Our Take (from the SES Sales Team)
“The Cobra 10.0 220C package is a good fit for an in-house carpet crew or a contractor who wants a compact, cold-water portable that is ready to work out of the box. It comes with a 13 in Trident wand and a 15 ft hose set, so there is nothing else to buy before the first job. The machine carries 10 gallons of solution and 10 gallons of recovery, which is a lot of capacity for a unit that weighs 82 lb and measures 34 in long and 19 in wide. U.S. Products rates the vacuum at 180 in of water lift and 107 CFM, and strong lift is what pulls water back out of the carpet so it dries faster. The 220 PSI pump runs on demand, only when the operator squeezes the wand trigger. Everything runs on a single 15 amp cord, so one outlet does the job. If your crews want heat, the Cobra 10.0 220H is the heated version, and the Cobra Max 500 adds adjustable pressure up to 500 PSI.”
A compact cold-water extractor, packaged with wand and hoses
The U.S. Products Cobra 10.0 220C is a portable, non-heated carpet extractor for hotels, schools, offices and other commercial carpet. It pairs a 220 PSI on-demand pump with a 3-stage vacuum rated at 180 in of water lift and 107 CFM, and carries 10 gallons of solution and 10 gallons of recovery.
This package adds a 13 in Trident wand and a 15 ft hose set, so the machine is ready to clean when it arrives. It runs on a single 15 amp, 25 ft cord.
Condition: New.
What you get
Machine, wand and hoses in one package
Trident 13 in wand, included
15 ft hose set, included
Why water lift matters
Features
Built for daily commercial carpet work
- ✓Compact frame, 34 in long and 19 in wide, for tight rooms, hallways and elevators
- ✓Strong recovery: 180 in of water lift and 107 CFM for faster drying
- ✓10 gal solution and recovery tanks for fewer trips to fill and dump
- ✓Ball float shuts off the vacuum when the recovery tank is full
- ✓Drain hose for emptying the recovery tank over a drain or bucket
Specifications
U.S. Products Cobra 10.0 220C at a glance
| Models | Cobra 10.0 220C with Trident wand and 15 ft hose set |
|---|---|
| Type | Portable carpet extractor, non-heated (cold water) |
| Pump | 220 PSI (15.2 bar) on-demand diaphragm pump |
| Vacuum | 3-stage, 180 in (457 cm) water lift, 107 CFM (3.0 m³/min) |
| Solution / recovery tanks | 10 gal (37.9 L) / 10 gal (37.9 L) |
| Vacuum shut-off | Ball float |
| Drain | Drain hose |
| Wheels | 3 in (7.6 cm) front casters, 8 in (20 cm) non-marking rear wheels |
| Power | 120 V, 15 A, single 25 ft (7.6 m) 12/3 cord |
| Dimensions (L x W x H) | 34 x 19 x 35 in (86 x 48 x 89 cm) |
| Weight | 82 lb (37 kg) |
| Wand | Trident 13 in, 6 lb (2.7 kg) |
| Hose set | 15 ft (4.6 m) pressure and vacuum hoses |
| Model Numbers | 05-10009-SV1P (Cobra 10.0 220C, Trident 13 in wand, 15 ft hose set) |
Technical specs may include optional equipment that is not included with all units.
Questions
Cobra 10.0 220C: common questions
What comes in this package?
The Cobra 10.0 220C extractor, a 13 in Trident wand and a 15 ft hose set with pressure and vacuum hoses.
Is the Cobra 10.0 220C heated?
No. The 220C is the cold-water version. U.S. Products also builds the Cobra 10.0 220H, which adds a heater and runs on two cords.
What power does it need?
One standard grounded outlet. U.S. Products rates it at 15 amps on a single 25 ft, 12/3 cord. If you need an extension cord, U.S. Products specifies 12/3 cord no longer than 50 ft.
Can I put hot water in the solution tank?
Warm water is fine, but U.S. Products says never to add water above 120°F (49°C) to the solution tank.
Not sure which Cobra fits your work?
Tell our team what you clean, how big the jobs are and what power you have on site, and we will help you decide if this is the right machine.
