Cobra 10.0 220 Cold, Single Vac, Single Cord - Machine Only
Our Take (from the SES Sales Team)
“The Cobra 10.0 220C machine-only listing is for buyers who already own wands and hoses, or who want to pick their own tools. It is a compact cold-water carpet extractor sized for hotels, schools, offices and other commercial carpet, where a crew needs to move between rooms and floors without a big machine. The tanks hold 10 gallons of solution and 10 gallons of recovery, and the whole unit is 34 in long, 19 in wide and 82 lb, with 8 in rear wheels for rolling it to the job. The vacuum is the strong point. U.S. Products rates it at 180 in of water lift and 107 CFM, which helps pull moisture out of the carpet for faster drying. The 220 PSI diaphragm pump runs only when the wand calls for spray, and a ball float shuts off the vacuum when the recovery tank is full. It runs on one 15 amp cord. If you need tools, the same machine is sold as a package with a 13 in Trident wand and a 15 ft hose set.”
A compact cold-water carpet extractor
The U.S. Products Cobra 10.0 220C is a portable, non-heated carpet extractor for hotels, schools, offices and other commercial carpet. It pairs a 220 PSI on-demand pump with a 3-stage vacuum rated at 180 in of water lift and 107 CFM, and carries 10 gallons of solution and 10 gallons of recovery.
This listing is the machine only, for crews that already have wands and hoses. It runs on a single 15 amp, 25 ft cord.
Condition: New.
What you get
The extractor, ready for your tools
Machine only
Features
Built for daily commercial carpet work
- ✓Compact frame, 34 in long and 19 in wide, for tight rooms, hallways and elevators
- ✓Strong recovery: 180 in of water lift and 107 CFM for faster drying
- ✓10 gal solution and recovery tanks for fewer trips to fill and dump
- ✓Ball float shuts off the vacuum when the recovery tank is full
- ✓Drain hose for emptying the recovery tank over a drain or bucket
Specifications
U.S. Products Cobra 10.0 220C at a glance
| Models | Cobra 10.0 220C, machine only |
|---|---|
| Type | Portable carpet extractor, non-heated (cold water) |
| Pump | 220 PSI (15.2 bar) on-demand diaphragm pump |
| Vacuum | 3-stage, 180 in (457 cm) water lift, 107 CFM (3.0 m³/min) |
| Solution / recovery tanks | 10 gal (37.9 L) / 10 gal (37.9 L) |
| Vacuum shut-off | Ball float |
| Drain | Drain hose |
| Wheels | 3 in (7.6 cm) front casters, 8 in (20 cm) non-marking rear wheels |
| Power | 120 V, 15 A, single 25 ft (7.6 m) 12/3 cord |
| Dimensions (L x W x H) | 34 x 19 x 35 in (86 x 48 x 89 cm) |
| Weight | 82 lb (37 kg) |
| Model Numbers | 05-10009-SV1 (Cobra 10.0 220C, machine only) |
Technical specs may include optional equipment that is not included with all units.
Questions
Cobra 10.0 220C: common questions
Does it come with a wand and hoses?
No. This is the machine only. U.S. Products sells the same machine as a package with a 13 in Trident wand and a 15 ft hose set.
Is the Cobra 10.0 220C heated?
No. The 220C is the cold-water version. U.S. Products also builds the Cobra 10.0 220H, which adds a heater and runs on two cords.
What power does it need?
One standard grounded outlet. U.S. Products rates it at 15 amps on a single 25 ft, 12/3 cord. If you need an extension cord, U.S. Products specifies 12/3 cord no longer than 50 ft.
How does the pump work?
It is a demand-style diaphragm pump with an internal pressure switch, so it runs only when the operator sprays. U.S. Products says this extends the life of the pump.
Not sure which Cobra fits your work?
Tell our team what you clean, how big the jobs are and what power you have on site, and we will help you decide if this is the right machine.
