Neptune 220H Heated, Single Cord - Contractor Special - Includes 13" Trident Wand & 15' Hose Set
Our Take (from the SES Sales Team)
“The Neptune 220H Contractor's Special is the heated version of U.S. Products' starter package, built for contractors and in-house crews who want warm-solution carpet cleaning on a single cord. It comes with a 13 in Trident wand and a 15 ft hose set, so it is ready for the first job. The 1,000 W heater warms the solution on its way to the wand, and warm solution helps loosen soil and speed up the job. The 220 PSI diaphragm pump runs on demand, only when the wand calls for spray. Each tank holds 15 gallons, so there are fewer trips to fill and dump on a bigger job, and U.S. Products rates the 3-stage vacuum at 120 in of lift and 97 CFM. Check your power before you buy: it runs on a single 25 ft cord, and U.S. Products lists the amp draw at 20 amps. At 98 lb with 12 in rear wheels, it moves easily between rooms. If you don't need heat, the Neptune 220C Contractor's Special is the cold-water version.”
A heated 15 gallon carpet extractor package on a single cord
The U.S. Products Neptune 220H Contractor's Special is a heated portable carpet extractor that arrives as a complete package with a 13 in Trident wand and a 15 ft hose set. U.S. Products designed it for contractors launching or expanding a cleaning business.
A 1,000 W heater, a 220 PSI on-demand diaphragm pump and a 3-stage vacuum rated at 120 in of water lift and 97 CFM handle routine carpet cleaning. The solution and recovery tanks each hold 15 gallons, and it runs on a single 25 ft cord.
Condition: New.
What you get
Machine, wand and hoses in one package
Trident 13 in wand, included
15 ft hose set, included
Check your outlet
Features
Built for heated commercial carpet work
- ✓1,000 W heater warms the solution on its way to the wand
- ✓220 PSI on-demand diaphragm pump runs only when you spray
- ✓15 gal solution and recovery tanks for longer runs between trips
- ✓Single 25 ft cord, with no second cord to manage
- ✓12 in non-marking rear wheels and 4 in front casters
Specifications
U.S. Products Neptune 220H Contractor's Special at a glance
| Models | Neptune 220H Contractor's Special with Trident wand and 15 ft hose set |
|---|---|
| Type | Portable carpet extractor, heated |
| Heater | 1,000 W |
| Pump | 220 PSI (15.2 bar), on-demand diaphragm |
| Vacuum | Single 5.7 in 3-stage motor, 120 in (305 cm) water lift, 97 CFM (2.7 m³/min) |
| Solution / recovery tanks | 15 gal (56.8 L) / 15 gal (56.8 L) |
| Vacuum shut-off | Ball float |
| Drain | Drain hose |
| Wheels | 4 in (10 cm) front casters, 12 in (30 cm) non-marking rear wheels |
| Power | 120 V, 20 A, single 25 ft (7.6 m) 12/3 cord |
| Dimensions (L x W x H) | 32 x 23 x 36 in (81 x 58 x 91 cm) |
| Weight | 98 lb (44 kg) |
| Wand | Trident 13 in, 6 lb (2.7 kg) |
| Hose set | 15 ft (4.6 m) pressure and vacuum hoses |
| Model Numbers | 05-10004-HP1 (Neptune 220H Contractor's Special, Trident 13 in wand, 15 ft hose set) |
Technical specs may include optional equipment that is not included with all units.
Questions
Neptune 220H: common questions
What comes in this package?
The Neptune 220H extractor, a 13 in Trident wand and a 15 ft hose set with pressure and vacuum hoses.
How do I keep the solution hot?
The heater holds a small amount of water. U.S. Products recommends spraying for short periods and pausing during recovery strokes so the water has time to heat.
Is there a cold-water version?
Yes. The Neptune 220C Contractor's Special is the same package without the heater, on a 15 A cord.
How big is it?
The Neptune 220H is 32 in long, 23 in wide and 36 in high, and weighs 98 lb.
Not sure which Neptune fits your work?
Tell our team what you clean, how big the jobs are and what power you have on site, and we will help you decide if this is the right machine.
