New Powr-Flite PDS1DX Air Mover
Our Take (from the SES Sales Team)
“The PDS1DX is the Powr-Dryer with a pull handle and wheels, so you can roll it from the van to the job instead of carrying it. Inside, it is the same blower as the standard PDS1: a 1/2 hp motor pushing air at up to 3,800 feet per minute while drawing only 4.4 amps. That low amp draw is a big deal on a carpet job or a water cleanup, because you can run more dryers on the same circuits without tripping breakers. Three speeds let you match the airflow to the job, and the housing can sit flat to dry carpet and floors, tilt up for floor finish or paint, or stand vertical to dry walls. The thermal overload protects the motor and resets itself once it cools. It is a solid choice for carpet cleaners, restoration techs and custodial teams who set out dryers after extraction or scrubbing. If your crew carries dryers by hand and wants to stack them, the standard PDS1 is the lighter, simpler option.”
A 3-speed air mover with a pull handle and wheels
The Powr-Flite PDS1DX Powr-Dryer is a commercial air mover for drying carpet and floors after extraction, scrubbing or water cleanup, and for drying floor finish, paint and walls.
It uses the same blower as the PDS1, with a pull handle and wheels added for transport. A 1/2 hp motor moves air at up to 3,800 feet per minute while drawing only 4.4 amps, so more dryers can share a circuit.
Condition: New.

What you get
Fast drying on a low amp draw
Why amp draw matters
Features
Simple, sturdy and portable
- ✓Pull handle and wheels for rolling transport
- ✓3,800 feet per minute air velocity from a 1/2 hp motor
- ✓Low 4.4 amp draw
- ✓Three speeds and three drying positions
- ✓Carrying handle, cord storage and kickstand

Compare the options
PDS1 or PDS1DX
| Model | Description | Transport |
|---|---|---|
| PDS1 | Powr-Dryer, 120 V | Carrying handle, stackable |
| PDS1DX (this unit) | Powr-Dryer Deluxe, 120 V | Pull handle and wheels |
Specifications
Powr-Flite PDS1DX at a glance
| Models | Powr-Dryer PDS1DX |
|---|---|
| Air velocity | 3,800 ft/min (1,158 m/min) |
| Motor | 1/2 hp |
| Amp draw | 4.4 A |
| Voltage | 120 V / 60 Hz |
| Speeds | 3 (710 / 1,105 / 1,550 rpm) |
| Drying positions | Horizontal, tilted, vertical |
| Housing | Co-polymer polypropylene |
| Sound level | 69 dBA |
| Motor protection | Automatic-reset thermal overload |
| Transport | Pull handle and wheels |
| Model Numbers | PDS1DX |
Technical specs may include optional equipment that is not included with all units.
Questions
Powr-Flite PDS1DX: common questions
How many dryers can I run on one circuit?
Each Powr-Dryer draws 4.4 amps. Check the rating of your circuits and add up the load before you plug in, and use only grounded outlets with ground fault protection.
Can I use an extension cord?
No. The manual says not to use an extension cord with this dryer.
What happens if it overheats?
A thermal sensor shuts the motor off. It resets automatically once the motor cools, usually in 15 to 30 minutes. Check the air inlet and outlet for blockage before restarting.
Can it be used outdoors?
No. It is for indoor use only and should be kept out of rain and moisture.
Not sure the PDS1DX is right for the job?
Tell our team what you are drying and how many units you run at once, and we will help you choose the right air mover.



