New Powr-Flite PDS1 Air Mover
Our Take (from the SES Sales Team)
“The PDS1 Powr-Dryer is a compact air mover that punches above its size. Powr-Flite rates it at 3,800 feet per minute of air velocity from a 1/2 hp motor that draws only 4.4 amps. That low draw matters: you can run more dryers on the same circuits after a carpet extraction or a water cleanup without tripping breakers. It weighs 22 lb and is compact enough for a closet or the back of a van, and the housing is designed to stack, so you can carry more dryers to the job and save room in storage. Three speeds let you match the airflow to the conditions. You can set it flat to dry carpet and floors, tilt it up on its kickstand for floor finish or paint, or stand it vertical to dry walls. A carrying handle, cord storage and a self-resetting thermal overload round it out. For crews who would rather roll than carry, the PDS1DX adds a pull handle and wheels.”
A compact, stackable 3-speed air mover
The Powr-Flite PDS1 Powr-Dryer is a commercial air mover for drying carpet and floors after extraction, scrubbing or water cleanup, and for drying floor finish, paint and walls.
A 1/2 hp motor moves air at up to 3,800 feet per minute while drawing only 4.4 amps, so more dryers can share a circuit.
Condition: New.

What you get
Fast drying on a low amp draw
Why amp draw matters
Features
Simple, sturdy and portable
- ✓Stackable design for transport and storage
- ✓3,800 feet per minute air velocity from a 1/2 hp motor
- ✓Low 4.4 amp draw
- ✓Three speeds and three drying positions
- ✓Carrying handle, cord storage and kickstand

Compare the options
PDS1 or PDS1DX
| Model | Description | Transport |
|---|---|---|
| PDS1 (this unit) | Powr-Dryer, 120 V | Carrying handle, stackable |
| PDS1DX | Powr-Dryer Deluxe, 120 V | Pull handle and wheels |

Specifications
Powr-Flite PDS1 at a glance
| Models | Powr-Dryer PDS1 |
|---|---|
| Air velocity | 3,800 ft/min (1,158 m/min) |
| Motor | 1/2 hp |
| Amp draw | 4.4 A |
| Voltage | 120 V / 60 Hz |
| Speeds | 3 (710 / 1,105 / 1,550 rpm) |
| Drying positions | Horizontal, tilted, vertical |
| Housing | Co-polymer polypropylene |
| Sound level | 69 dBA |
| Motor protection | Automatic-reset thermal overload |
| Weight | 22 lb (10 kg) |
| Model Numbers | PDS1 |
Technical specs may include optional equipment that is not included with all units.
Questions
Powr-Flite PDS1: common questions
How many dryers can I run on one circuit?
Each Powr-Dryer draws 4.4 amps. Check the rating of your circuits and add up the load before you plug in, and use only grounded outlets with ground fault protection.
Can I use an extension cord?
No. The manual says not to use an extension cord with this dryer.
What happens if it overheats?
A thermal sensor shuts the motor off. It resets automatically once the motor cools, usually in 15 to 30 minutes. Check the air inlet and outlet for blockage before restarting.
Can it be used outdoors?
No. It is for indoor use only and should be kept out of rain and moisture.
Not sure the PDS1 is right for the job?
Tell our team what you are drying and how many units you run at once, and we will help you choose the right air mover.





