| PRODUCT SPECIFICATIONS | |
|---|---|
| Model | CVD 30 |
| Catalog Number | 91430 |
| MACHINE DIMENSIONS | |
| Dimensions (L x W x H) | 12.75" x 12" x 45" |
| Net Weight | 17.4 lbs. |
| Shipping Weight | 18 lbs. |
| Recovery Bag Capacity | 5.51 liter / 1.72 gal |
| DESIGN CHARACTERISTICS | |
| Cord Type | 40', 18 gauge, 3-wire SJT, safety yellow, extension cord |
| Cord Strain Relief | Yes |
| Body Construction | Polypropylene |
| Handle Design | Ergonomic |
| Housing Bumper | Non-Marking |
| Easy Debris Access | Yes |
| Belt Type / Design | Non-slip toothed |
| Standard Bag Type | CleanBreeze |
| CLEANING SYSTEM | |
| CFM | 102 |
| Water Lift | 81.5" |
| Cleaning Productivity | 2,239 ft/hr |
| Sound Level | 66 dB |
| Cleaning Path | 12" |
| Brush Design | Dusting Brush |
| Filtration System | 3-Stage System |
| On Board Tools | Yes |
| MOTORS | |
| Vacuum Motor | 9 amps |
New Tornado Brute Force 2000 Glazer 20" Dust Control Burnisher
Our Take (from the SES Sales Team)
“If you burnish while people are in the building, dust is the part of the job everyone notices. That is where the dust control version of the Brute Force 2000 Glazer earns its place. It has the same 20 in, 2,000 rpm pad and 1.5 hp motor as the standard Brute Force 2000, and adds a system that controls the dust the burnishing process kicks up. Tornado says it meets LEED and CIMS-GB standards, which matters in schools, healthcare buildings and offices that track indoor air quality. The rest of the machine is what makes the series a good value: balanced weight that keeps the whole pad on the floor without a caster, a flexible pad holder that rides over uneven spots and a one-piece molded housing that takes the vibration out of the handle. It weighs 89 lb and rolls on non-marking wheels. If dust is not a concern where you work, the standard model does the same burnishing job.”
A high-speed burnisher that keeps the dust down
The Tornado Brute Force 2000 Glazer with dust control is a 120 V corded burnisher with a 20 in burnishing path, a 1.5 hp motor and a pad speed of 2,000 rpm. Its dust control system controls the dust generated by burnishing and meets LEED and CIMS-GB standards.
Like the rest of the Brute Force Series of High Speed Glazers, it uses a patented, precision-balanced design that keeps the full pad on the floor without a compensating center or front-mount caster, plus a flex pad holder, lock-in retainer and all-metal tube and switch housing.
Condition: New.
What you get
Ready to burnish, with less dust
Where dust control makes sense
Features
Built to stay smooth at speed
- ✓Dust control system meets LEED and CIMS-GB standards
- ✓Balanced weight distribution gives full pad-to-floor contact with no compensating center or front caster
- ✓Flexible, self-adjusting pad driver follows uneven floor areas
- ✓One-piece rotationally molded housing absorbs torque and vibration
- ✓One-piece all-metal tube and switch housing with a floating handle
Compare
Dust control or standard
| Model | Brute Force 2000 Glazer | Brute Force 2000 Glazer, dust control |
|---|---|---|
| Tornado number | 98482B | 98486 |
| Pad speed | 2,000 rpm | 2,000 rpm |
| Pad pressure | 16 lb (7.3 kg) | 16 lb (7.3 kg) |
| Motor | 1.5 hp | 1.5 hp |
| Dust control | No | Yes, meets LEED and CIMS-GB standards |
| Net weight | 89 lb (40 kg) | 89 lb (40 kg) |
Specifications
Brute Force 2000 with dust control at a glance
| Models | Brute Force 2000 Glazer, dust control |
|---|---|
| Cleaning path | 20 in (508 mm) |
| Pad type | Rotary disc, 20 in (508 mm) |
| Pad speed | 2,000 rpm |
| Pad pressure | 16 lb (7.3 kg) |
| Motor | 1.5 hp PM DC rectified motor |
| Dust control | Yes |
| Housing | High-density polyethylene, one-piece rotationally molded |
| Handle | All metal, positive lock |
| Wheels | 4 in (10 cm) non-marking, self-lubricating |
| Motor height | 22 in (56 cm) |
| Dimensions (L x W x H) | 35.5 x 23 x 44.5 in (90 x 58 x 113 cm) |
| Net weight | 89 lb (40 kg) |
| Pad holder / pad retainer | 919DP / F44P |
| Model Numbers | 98486 (Brute Force 2000 Glazer, dust control) |
Technical specs may include optional equipment that is not included with all units.
Questions
Brute Force 2000 dust control: common questions
What does the dust control do?
It controls the dust generated by the burnishing process. Tornado says this model meets LEED and CIMS-GB standards.
Is it the same machine as the standard Brute Force 2000?
It shares the 20 in path, 2,000 rpm pad speed, 16 lb pad pressure, 1.5 hp motor, housing and handle. The difference is the dust control system.
What power does it need?
It is a 120 V corded electric machine, so there are no batteries to charge or maintain.
How big and heavy is it?
It measures 35.5 x 23 x 44.5 in, weighs 89 lb and rolls on 4 in non-marking wheels.
Not sure the dust control Brute Force fits your building?
Tell our team about your floors, your finish and when you burnish, and we will help you decide if this is the right machine.
