| PRODUCT SPECIFICATIONS | |
|---|---|
| Model | CVD 30 |
| Catalog Number | 91430 |
| MACHINE DIMENSIONS | |
| Dimensions (L x W x H) | 12.75" x 12" x 45" |
| Net Weight | 17.4 lbs. |
| Shipping Weight | 18 lbs. |
| Recovery Bag Capacity | 5.51 liter / 1.72 gal |
| DESIGN CHARACTERISTICS | |
| Cord Type | 40', 18 gauge, 3-wire SJT, safety yellow, extension cord |
| Cord Strain Relief | Yes |
| Body Construction | Polypropylene |
| Handle Design | Ergonomic |
| Housing Bumper | Non-Marking |
| Easy Debris Access | Yes |
| Belt Type / Design | Non-slip toothed |
| Standard Bag Type | CleanBreeze |
| CLEANING SYSTEM | |
| CFM | 102 |
| Water Lift | 81.5" |
| Cleaning Productivity | 2,239 ft/hr |
| Sound Level | 66 dB |
| Cleaning Path | 12" |
| Brush Design | Dusting Brush |
| Filtration System | 3-Stage System |
| On Board Tools | Yes |
| MOTORS | |
| Vacuum Motor | 9 amps |
New Tornado Brute Force 2000 Glazer 20" Burnisher
Our Take (from the SES Sales Team)
“The Brute Force 2000 Glazer is a simple corded burnisher for crews who want a real high-speed shine without a lot of extra machine to learn. It spins a 20 in pad at 2,000 rpm on a 1.5 hp motor, and Tornado balances the weight so the pad stays in full contact with the floor without a front or center caster to compensate. Full contact is what gets you an even gloss instead of a streaky one. The flexible pad holder adjusts itself over slightly uneven spots, and the one-piece molded housing is built to soak up the torque and vibration you usually feel through the handle of a high-speed machine. The all-metal tube and switch housing gives the operator a solid, positive feel. At 89 lb it rolls between areas on its wheels rather than getting carried. If people will be in the building while you burnish, or airborne dust is a concern, look at the dust control version of this same machine. For routine burnishing of finished floors in schools, offices and stores, this one covers the job well.”
A balanced 2,000 rpm burnisher for a smooth, even gloss
The Tornado Brute Force 2000 Glazer is a corded electric high-speed burnisher with a 20 in burnishing path, a 1.5 hp motor and a pad speed of 2,000 rpm. It is part of the Brute Force Series of High Speed Glazers, built to restore and maintain finished hard floors.
Tornado’s patented design and precision weight distribution keep the whole pad on the floor, so there is no need for a compensating center or front-mount caster. A flex pad holder, lock-in pad retainer and all-metal tube and switch housing round out the machine.
Condition: New.
What you get
Ready to burnish
Why full pad contact matters
Features
Built to stay smooth at speed
- ✓Balanced weight distribution gives full pad-to-floor contact with no compensating center or front caster
- ✓Flexible, self-adjusting pad driver follows uneven floor areas
- ✓One-piece rotationally molded housing absorbs torque and vibration
- ✓One-piece all-metal tube and switch housing for operator control
- ✓Floating handle with no flutter or pull, and an enclosed motor with easy service access
Compare
Standard or dust control
| Model | Brute Force 2000 Glazer | Brute Force 2000 Glazer, dust control |
|---|---|---|
| Tornado number | 98482B | 98486 |
| Pad speed | 2,000 rpm | 2,000 rpm |
| Pad pressure | 16 lb (7.3 kg) | 16 lb (7.3 kg) |
| Motor | 1.5 hp | 1.5 hp |
| Dust control | No | Yes, meets LEED and CIMS-GB standards |
| Net weight | 89 lb (40 kg) | 89 lb (40 kg) |
Specifications
Brute Force 2000 Glazer at a glance
| Models | Brute Force 2000 Glazer |
|---|---|
| Cleaning path | 20 in (508 mm) |
| Pad type | Rotary disc, 20 in (508 mm) |
| Pad speed | 2,000 rpm |
| Pad pressure | 16 lb (7.3 kg) |
| Motor | 1.5 hp PM DC rectified motor |
| Dust control | No |
| Housing | High-density polyethylene, one-piece rotationally molded |
| Handle | All metal, positive lock |
| Wheels | 4 in (10 cm) non-marking, self-lubricating |
| Motor height | 22 in (56 cm) |
| Dimensions (L x W x H) | 35.5 x 23 x 44.5 in (90 x 58 x 113 cm) |
| Net weight | 89 lb (40 kg) |
| Pad holder / pad retainer | 919DP / F44P |
| Model Numbers | 98482B (Brute Force 2000 Glazer) |
Technical specs may include optional equipment that is not included with all units.
Questions
Brute Force 2000 Glazer: common questions
Does it need a front or center caster?
No. Tornado’s patented design and balanced weight distribution give full pad-to-floor contact without a compensating center or front-mount caster.
What pad holder and retainer does it use?
It uses the 919DP flex pad holder and the F44P lock-in pad retainer, the same parts used across the Brute Force Glazer series.
How is this different from the dust control model?
Both turn a 20 in pad at 2,000 rpm with a 1.5 hp motor. The dust control model (98486) adds a system that controls the dust burnishing creates and meets LEED and CIMS-GB standards. This model does not have dust control.
How big and heavy is it?
It measures 35.5 x 23 x 44.5 in, weighs 89 lb and rolls on 4 in non-marking wheels.
Not sure the Brute Force 2000 fits your floors?
Tell our team about your floors, the finish you use and how often you burnish, and we will help you decide if this is the right machine.
