| Machine Type | Rider Burnisher |
|---|---|
| Power Source | Battery (Electric) |
| Battery Type | AGM (Absorbed Glass Mat) |
| Battery Capacity | 390 Ah |
New NSS eFORCE Rider Burnisher with CAL - 390Ah AGM Battery
Our Take (from the SES Sales Team)
“If your buildings are full of people during the day and you want a high-gloss finish without bringing propane inside, the eForce is the rider burnisher to look at. It is battery powered, so there is no exhaust, no fuel to store and no engine to service, and NSS rates it at 68 dBA. The 27 in pad is mounted up front, which helps it get into corners, and it spins at up to 1,700 rpm with 60, 75 or 90 lb of pad pressure. NSS rates productivity at 35,640 sq ft per hour. Operators drive it with a single joystick instead of a steering wheel and pedal, and the touch screen keeps the controls and the operation manual in one place. Vac-Trac captures 99.5 percent of the finish dust. This package uses six 6 V, 390 Ah AGM batteries, good for up to 3 hours per NSS, and they never need watering. For crews that would rather not maintain batteries, that is a real plus.”
A 27 in ride-on battery burnisher with joystick control
The NSS eForce Burnisher is a ride-on battery burnisher for schools, healthcare, retail and other large hard floors. A 27 in front-mounted pad runs at up to 1,700 rpm with 60, 75 or 90 lb of pad pressure, and NSS rates it at 35,640 sq ft per hour. The patented joystick drives the machine with no steering wheel or foot pedal.
This CAL configuration runs on six 6 V, 390 Ah AGM batteries (36 V), sealed and maintenance free, with up to 3 hours of runtime and a 36 V charger.
Condition: New.
What you get
Propane productivity, battery simplicity
The electric advantage
Features
Built for heavy-duty commercial use
- ✓Front-mounted burnishing head reaches into corners that center-mounted machines cannot
- ✓Flip-up pad driver lets the operator change pads standing up
- ✓Flexiwall shield surrounds the pad and keeps debris out of the pad area
- ✓Tilt switch prevents operation when the head is up, and the controller protects the motor from overload
- ✓10-gauge steel frame with a powder-coated steel body and a battery tray with drain
Choosing batteries
eForce battery options
| Battery package | Runtime | Machine weight |
|---|---|---|
| 390 Ah AGM (this unit) | Up to 3.0 hr | 1,267 lb (574 kg) |
| 430 Ah wet | Up to 3.5 hr | 1,237 lb (561 kg) |
AGM batteries are sealed and maintenance free. Wet (flooded) batteries cost less up front and run a little longer, but need regular watering.
Specifications
NSS eForce Burnisher at a glance
| Models | eForce Burnisher CAL, 390 Ah AGM |
|---|---|
| Pad size | 27 in (69 cm) |
| Pad speed | 3 settings, up to 1,700 rpm |
| Pad pressure | 60, 75 or 90 lb (27, 34 or 41 kg) |
| Pad motor | 3.0 hp (2,237 W), permanent magnet, 36 V |
| Productivity | 35,640 sq ft/hr (3,311 m²) |
| Drive system | Joystick-controlled dual drive motors, 0.25 hp each |
| Burnishing speed | 150 or 175 ft/min (46 or 53 m/min) |
| Transport speed | Forward 435 ft/min; reverse 240 ft/min |
| Dust control | Vac-Trac, 99.5% capture; 1.9 gal (7.2 L) dust bag |
| Batteries | 6 x 6 V, 390 Ah AGM (36 V system) |
| Runtime | Up to 3.0 hr |
| Charger | 36 VDC output |
| Wheels | Two 10 in wheels, two 6 in casters |
| Frame / housing | 10-gauge steel frame; steel and rotomolded polyethylene housing |
| Sound level | 68 dBA |
| Dimensions (L x W x H) | 62 x 30 x 49 in (157 x 76 x 123 cm) |
| Minimum aisle turn | 65 in (165 cm) |
| Machine weight | 1,267 lb (574 kg) |
| Shipping weight | 1,350 lb (612 kg) |
| Model Numbers | 6402778 (eForce Burnisher CAL, 390 Ah AGM) |
Technical specs may include optional equipment that is not included with all units.
Questions
NSS eForce Burnisher: common questions
How long does the eForce run on a charge?
NSS rates the 390 Ah AGM battery package at up to 3 hours. Actual runtime depends on the floor, the pad pressure and how the machine is driven.
Do the AGM batteries need watering?
No. AGM batteries are sealed and maintenance free, with no cell caps to open or water to add.
How does it control dust?
The Vac-Trac dust control system is built into the pad motor shroud and captures 99.5 percent of the floor finish powder created while burnishing, collecting it in a 1.9 gal bag.
Will it fit my aisles and doorways?
The eForce is 62 in long, 30 in wide and 49 in high, with a 65 in minimum aisle turn. Measure your tightest doorway and aisle before you order.
Can it burnish on a slope?
NSS rates the eForce for burnishing on grades up to 9 percent and transport on grades up to 13 percent. Never stop or turn the machine on a ramp or incline.
Not sure the eForce fits your floors?
Tell our team about the floor, the building and the shift, and we will help you decide if this is the right machine.
