| Power Source | Battery (Electric) |
|---|---|
| Battery Type | CAL Flooded Wet Lead-Acid |
| Battery Capacity | 430Ah |
| Machine Type | Rider Burnisher |
New NSS eFORCE Rider Burnisher with CAL - 430Ah Wet Battery
Our Take (from the SES Sales Team)
“The eForce gives you the speed of a ride-on burnisher with none of the propane hassle, which is why it fits schools, hospitals and stores that burnish while people are around. There are no fumes, no fuel tanks and no engine oil to change. It runs a 27 in front-mounted pad at up to 1,700 rpm, with three pad pressure settings, and NSS rates it at 35,640 sq ft per hour. The joystick is the part operators notice first: no steering wheel and no foot pedal, and it returns to neutral when released. Dust is handled by Vac-Trac, which NSS says captures 99.5 percent of the finish powder. This package runs on six 6 V, 430 Ah flooded wet batteries, and NSS rates it at up to 3.5 hours, the longest runtime of the eForce battery options. The trade-off is watering, so it suits a crew that already keeps up with battery maintenance.”
A 27 in ride-on battery burnisher with joystick control
The NSS eForce Burnisher is a ride-on battery burnisher for schools, healthcare, retail and other large hard floors. A 27 in front-mounted pad runs at up to 1,700 rpm with 60, 75 or 90 lb of pad pressure, and NSS rates it at 35,640 sq ft per hour. The patented joystick drives the machine with no steering wheel or foot pedal.
This CAL configuration runs on six 6 V, 430 Ah flooded wet batteries (36 V), the longest-running eForce battery package at up to 3.5 hours, with a 120 V charger.
Condition: New.
What you get
Propane productivity, battery simplicity
The electric advantage
Features
Built for heavy-duty commercial use
- ✓Front-mounted burnishing head reaches into corners that center-mounted machines cannot
- ✓Flip-up pad driver lets the operator change pads standing up
- ✓Flexiwall shield surrounds the pad and keeps debris out of the pad area
- ✓Tilt switch prevents operation when the head is up, and the controller protects the motor from overload
- ✓10-gauge steel frame with a powder-coated steel body and a battery tray with drain
Choosing batteries
eForce battery options
| Battery package | Runtime | Machine weight |
|---|---|---|
| 430 Ah wet (this unit) | Up to 3.5 hr | 1,237 lb (561 kg) |
| 390 Ah AGM | Up to 3.0 hr | 1,267 lb (574 kg) |
Wet (flooded) batteries cost less up front and run a little longer, but need regular watering. AGM batteries are sealed and maintenance free.
Specifications
NSS eForce Burnisher at a glance
| Models | eForce Burnisher CAL, 120 V, 430 Ah wet |
|---|---|
| Pad size | 27 in (69 cm) |
| Pad speed | 3 settings, up to 1,700 rpm |
| Pad pressure | 60, 75 or 90 lb (27, 34 or 41 kg) |
| Pad motor | 3.0 hp (2,237 W), permanent magnet, 36 V |
| Productivity | 35,640 sq ft/hr (3,311 m²) |
| Drive system | Joystick-controlled dual drive motors, 0.25 hp each |
| Burnishing speed | 150 or 175 ft/min (46 or 53 m/min) |
| Transport speed | Forward 435 ft/min; reverse 240 ft/min |
| Dust control | Vac-Trac, 99.5% capture; 1.9 gal (7.2 L) dust bag |
| Batteries | 6 x 6 V, 430 Ah wet (36 V system) |
| Runtime | Up to 3.5 hr |
| Charger | 120 VAC input, 36 VDC output |
| Wheels | Two 10 in wheels, two 6 in casters |
| Frame / housing | 10-gauge steel frame; steel and rotomolded polyethylene housing |
| Sound level | 68 dBA |
| Dimensions (L x W x H) | 62 x 30 x 49 in (157 x 76 x 123 cm) |
| Minimum aisle turn | 65 in (165 cm) |
| Machine weight | 1,237 lb (561 kg) |
| Model Numbers | 6402776 (eForce Burnisher CAL, 120 V, 430 Ah wet) |
Technical specs may include optional equipment that is not included with all units.
Questions
NSS eForce Burnisher: common questions
How long does the eForce run on a charge?
NSS rates the 430 Ah wet battery package at up to 3.5 hours. Actual runtime depends on the floor, the pad pressure and how the machine is driven.
Do the wet batteries need maintenance?
Yes. Flooded wet batteries need their water level checked and topped up with distilled water on a regular schedule. If you would rather skip watering, the eForce is also offered with 390 Ah AGM batteries.
How does it control dust?
The Vac-Trac dust control system is built into the pad motor shroud and captures 99.5 percent of the floor finish powder created while burnishing, collecting it in a 1.9 gal bag.
Will it fit my aisles and doorways?
The eForce is 62 in long, 30 in wide and 49 in high, with a 65 in minimum aisle turn. Measure your tightest doorway and aisle before you order.
Can it burnish on a slope?
NSS rates the eForce for burnishing on grades up to 9 percent and transport on grades up to 13 percent. Never stop or turn the machine on a ramp or incline.
Not sure the eForce fits your floors?
Tell our team about the floor, the building and the shift, and we will help you decide if this is the right machine.
