| Power Source | Battery (Electric) |
|---|---|
| Battery Type | Flooded Wet Lead-Acid |
| Battery Capacity | 430Ah |
| Machine Type | Ride-On Burnisher |
New NSS eFORCE Rider Burnisher - 430Ah Wet Battery
Our Take (from the SES Sales Team)
“A lot of facilities want to get away from propane burnishers but still need rider-level coverage, and the eForce is built for exactly that: schools, hospitals, retail stores and other occupied buildings. It drives a 27 in pad at up to 1,700 rpm with three pad pressure settings, and NSS rates it at 35,640 sq ft per hour. This package uses six 6 V, 430 Ah wet batteries, which NSS rates at up to 3.5 hours, a half hour more than the AGM option. Wet batteries need regular watering, so it suits a team that already keeps up with battery care. The operator steers with NSS’s patented joystick instead of a steering wheel and foot pedal. The Vac-Trac system in the pad shroud captures 99.5 percent of the finish powder that burnishing kicks up. NSS also notes there is no propane fuel, oil change or engine repair to deal with. The head is front-mounted to reach into corners and flips up for standing pad changes.”
A 27 in ride-on battery burnisher with joystick control
The NSS eForce Burnisher is a ride-on battery burnisher for schools, healthcare, retail and other large hard floors. A 27 in front-mounted pad runs at up to 1,700 rpm with 60, 75 or 90 lb of pad pressure, and NSS rates it at 35,640 sq ft per hour. The patented joystick drives the machine with no steering wheel or foot pedal.
This configuration runs on six 6 V, 430 Ah wet (flooded) batteries (36 V), with up to 3.5 hours of runtime per NSS and a 120 V charger.
Condition: New.
What you get
Propane productivity, battery simplicity
The electric advantage
Features
Built for heavy-duty commercial use
- ✓Front-mounted burnishing head reaches into corners that center-mounted machines cannot
- ✓Flip-up pad driver lets the operator change pads standing up
- ✓Flexiwall shield surrounds the pad and keeps debris out of the pad area
- ✓Tilt switch prevents operation when the head is up, and the controller protects the motor from overload
- ✓10-gauge steel frame with a powder-coated steel body and a battery tray with drain
Choosing batteries
eForce battery options
| Battery package | Runtime | Machine weight |
|---|---|---|
| 430 Ah wet (this unit) | Up to 3.5 hr | 1,237 lb (561 kg) |
| 390 Ah AGM | Up to 3.0 hr | 1,267 lb (574 kg) |
Wet (flooded) batteries cost less up front and run a little longer, but need regular watering. AGM batteries are sealed and maintenance free.
Specifications
NSS eForce Burnisher at a glance
| Models | eForce Burnisher, 120 V, 430 Ah wet |
|---|---|
| Pad size | 27 in (69 cm) |
| Pad speed | 3 settings, up to 1,700 rpm |
| Pad pressure | 60, 75 or 90 lb (27, 34 or 41 kg) |
| Pad motor | 3.0 hp (2,237 W), permanent magnet, 36 V |
| Productivity | 35,640 sq ft/hr (3,311 m²) |
| Drive system | Joystick-controlled dual drive motors, 0.25 hp each |
| Burnishing speed | 150 or 175 ft/min (46 or 53 m/min) |
| Transport speed | Forward 435 ft/min; reverse 240 ft/min |
| Dust control | Vac-Trac, 99.5% capture; 1.9 gal (7.2 L) dust bag |
| Batteries | 6 x 6 V, 430 Ah wet (36 V system) |
| Runtime | Up to 3.5 hr |
| Charger | 120 VAC input, 36 VDC output |
| Wheels | Two 10 in wheels, two 6 in casters |
| Frame / housing | 10-gauge steel frame; steel and rotomolded polyethylene housing |
| Sound level | 68 dBA |
| Dimensions (L x W x H) | 62 x 30 x 49 in (157 x 76 x 123 cm) |
| Minimum aisle turn | 65 in (165 cm) |
| Machine weight | 1,237 lb (561 kg) |
| Shipping weight | 1,320 lb (599 kg) |
| Model Numbers | 6402770 (eForce Burnisher, 120 V, 430 Ah wet) |
Technical specs may include optional equipment that is not included with all units.
Questions
NSS eForce Burnisher: common questions
How long does the eForce run on a charge?
NSS rates the 430 Ah wet battery package at up to 3.5 hours. Actual runtime depends on the floor, the pad pressure and how the machine is driven.
How does it control dust?
The Vac-Trac dust control system is built into the pad motor shroud and captures 99.5 percent of the floor finish powder created while burnishing, collecting it in a 1.9 gal bag.
How do operators steer it?
With a single joystick. It controls direction and speed through two drive motors, and it returns to neutral when released. There is no steering wheel or foot pedal.
Will it fit my aisles and doorways?
The eForce is 62 in long, 30 in wide and 49 in high, with a 65 in minimum aisle turn. Measure your tightest doorway and aisle before you order.
Can it burnish on a slope?
NSS rates the eForce for burnishing on grades up to 9 percent and transport on grades up to 13 percent. Never stop or turn the machine on a ramp or incline.
Not sure the eForce fits your floors?
Tell our team about the floor, the building and the shift, and we will help you decide if this is the right machine.
