Free Shipping on Equipment & Parts orders of $200 or more! * Click for Restrictions

Have a question? 800-440-6723 International: 803-252-0100

English Se habla español

Need Help Choosing?

Talk to a real SES tech about the right machine or part for your floors.

Call 800-440-6723 International: +1 803-252-0100
Machine TypeWalk-Behind Battery Burnisher
Cleaning Path Width20 in (508 mm)
Power SourceBattery (AGM)
Battery Capacity220 Ah
Battery TypeAGM (Absorbed Glass Mat)
Onboard ChargerYes

New NSS CHARGER 2022DB 20" Walk-Behind Burnisher - 220Ah AGM Battery

Part Number:
ENSL6402028
OEM Number:
ENSL6402028
Availability:
Ships from Supplier - Availability May Vary
Equipment Type:
Buffers/Burnishers
List Price:
14,900.00
Machine Type:
Equipment
Manufacturer:
NSS
Our Price:
14,900.00
Shipping Designation:
Qualifies for Free/Flat Rate Shipping
Warranty Information:
Full Factory Warranty
Price:
$14,900.00/EA
In Stock

Our Take (from the SES Sales Team)

“The Charger 2022 DB is a good fit for buildings that burnish often and want to get away from propane: schools, grocery and retail stores, hospitals and office lobbies. It spins a 20 in pad at 2,200 rpm with 70 lb of pad pressure, and NSS rates it at 24,000 sq ft per hour. The DB stands for drive, and that matters on a machine this size. A twist-grip throttle runs a drive motor, so the operator steers instead of pushing a 720 lb burnisher across the building. This package runs on six 220 Ah AGM batteries rated for up to 2.7 hours, with no battery watering, and the charger is on board. With no engine there are no fumes, no oil changes and no tanks to swap, and at 68 dBA it is quiet enough for occupied buildings. The Vac-Trac dust control captures the finish powder burnishing creates. If your runs are long, NSS also offers a ride-behind sulky for it.”

20 in
Pad size
2,200 rpm
Pad speed
70 lb
Pad pressure
24,000 sq ft/hr
Productivity
36 V
Wheel-drive system
68 dBA
Sound level

A 20 in wheel-drive battery burnisher with no propane to manage

The NSS Charger 2022 DB is a 20 in battery burnisher that restores the wet-look gloss of floor finish without propane fumes or exhaust. A 2.5 hp, 36 V pad motor spins the pad at 2,200 rpm with 70 lb of pad pressure, a wheel drive with a twist-grip throttle moves the machine, and NSS rates it at 24,000 sq ft per hour.

This configuration runs on six 6 V, 220 Ah AGM batteries, sealed and maintenance free, rated by NSS for up to 2.7 hours. The onboard charger plugs in at any standard outlet.

Condition: New.

NSS Charger 2022 DB battery burnisher, front three-quarter view showing the pad shroud, dust bag and battery housing

What you get

Cord-free burnishing, ready to charge

220 Ah AGM

36 V battery pack

Six 6 V sealed AGM batteries. Up to 2.7 hours of runtime per NSS, with no cell caps to open or water to add.

Onboard

Battery charger

The charger is built in, so you can recharge anywhere there is a standard outlet with no separate charger to store.

Optional

Sulky attachment

Add the ride-behind sulky later if your runs get longer. It flips up and stores on the handle when not in use.

Captures the dust it makes

Burnishing turns worn floor finish into fine powder. The Vac-Trac dust control system built into the pad shroud channels that air into a filter bag that NSS says collects 99.5 percent of the dust, which helps protect indoor air quality.

Features

Built for daily commercial use

  • ✓Wheel drive with a twist-grip throttle reduces operator fatigue
  • ✓Machine controller protects the motor by stopping the pad if current gets too high, and a tilt switch prevents operation with the pad raised
  • ✓LED display shows battery charge and diagnostic codes when service is needed
  • ✓Lift-up top cover opens a wide battery compartment, with a drained battery tray underneath
  • ✓10-gauge powder-coated steel frame with a 12-gauge steel housing and ABS Flexiwall shield
NSS Charger 2022 DB battery burnisher, three-quarter view from the handle side showing the control panel and casters

Choosing a Charger

Which battery Charger fits your building?

Charger 2022 ABLTCharger 2022 DB (this unit)Charger 2717 DB
Pad size20 in20 in27 in
Pad speed2,200 rpm2,200 rpm1,700 rpm
DrivePad assistWheel driveWheel drive
System24 V36 V36 V
Productivity16,300 sq ft/hr24,000 sq ft/hr32,342 sq ft/hr

Standing pad changes

Tip the machine back to reach the pad driver from a standing position. Change pads when they glaze over to keep the shine consistent.
NSS Charger 2022 DB tipped back with the 20 in burnishing pad facing out for a pad change

Specifications

NSS Charger 2022 DB at a glance

ModelsCharger 2022 DB
Pad size20 in (51 cm)
Pad speed2,200 rpm
Pad pressure70 lb (34 kg)
Pad motor2.5 hp (1,865 W), 36 V DC permanent magnet
Drive motor0.5 hp, 36 V DC permanent magnet
Batteries6 x 6 V, 220 Ah AGM (36 V system)
RuntimeUp to 2.7 hr
ChargerOnboard
Productivity24,000 sq ft/hr (2,230 m²)
Dust controlVac-Trac, 99.5% dust collection bag
Frame / housing10-gauge / 12-gauge powder-coated steel
Drive wheel / castersOne 10 in non-marking tire / two 6 in ball bearing casters
Sound level68 dBA
Dimensions (L x W x H)57 x 24 x 42 in (143 x 61 x 106 cm)
Machine weight720 lb (326 kg)
Shipping weight825 lb (374 kg)
Model Numbers6402028 (Charger 2022 DB, onboard charger, 220 Ah AGM)

Technical specs may include optional equipment that is not included with all units.

Questions

NSS Charger 2022 DB: common questions

How long does it run on a charge?

NSS rates the 220 Ah AGM package at up to 2.7 hours. Actual runtime depends on the floor and how long the pad is down.

Do the AGM batteries need watering?

No. AGM batteries are sealed and maintenance free, with no cell caps to remove.

How much floor can it burnish in an hour?

NSS rates the Charger 2022 DB at 24,000 sq ft per hour.

Can I add a sulky later?

Yes. NSS offers an optional ride-behind sulky for the Charger 2022 DB. It flips up and stores on the handle when not in use.

Can it polish concrete?

Yes. NSS says the Charger 2022 motor is powerful enough for concrete polishing with diamond pads, as well as restoring the luster of floor finish after scrubbing.

Not sure the Charger 2022 DB fits your floors?

Tell our team about the floor, the building and how often you burnish, and we will help you decide if this is the right machine.

Not Sure Which Machine Fits Your Floors?

Talk to a real SES tech about new, demo or certified reconditioned options, parts and service.

© 2026 Southeastern Equipment and Supply. All Rights Reserved.

Visa Discover AMEX Mastercard