Free Shipping on Equipment & Parts orders of $200 or more! * Click for Restrictions

Have a question? 800-440-6723 International: 803-252-0100

English Se habla español

Need Help Choosing?

Talk to a real SES tech about the right machine or part for your floors.

Call 800-440-6723 International: +1 803-252-0100
Machine TypeSulky Walk-Behind Burnisher
Cleaning Path Width20 in
Power SourceBattery (Electric)
Battery TypeAGM (Absorbed Glass Mat)
Battery Capacity235 Ah

New NSS CHARGER 2022DB Sulky 20" Walk-Behind Burnisher - 235Ah AGM Battery

Part Number:
ENSL6402026
OEM Number:
ENSL6402026
Availability:
Ships from Supplier - Availability May Vary
Equipment Type:
Buffers/Burnishers
List Price:
16,000.00
Machine Type:
Equipment
Manufacturer:
NSS
Our Price:
16,000.00
Shipping Designation:
Qualifies for Free/Flat Rate Shipping
Warranty Information:
Full Factory Warranty
Price:
$16,000.00/EA
In Stock

Our Take (from the SES Sales Team)

“This is the Charger 2022 DB set up for long runs, with the ride-behind sulky included. It suits big schools, grocery stores, hospitals and retail floors where walking behind a burnisher for an entire shift wears people out. The machine spins a 20 in pad at 2,200 rpm with 70 lb of pad pressure, and NSS rates it at 24,000 sq ft per hour. A twist-grip throttle runs the wheel drive, so the operator steers instead of pushing, and the sulky flips up and stores on the handle when they need to walk it through a tight spot. This package runs on six 235 Ah AGM batteries, sealed with no watering, and the charger is on board so it plugs into any outlet. As a battery machine it has no fumes, no oil changes and no propane tanks to swap, and the Vac-Trac dust control captures the finish powder burnishing creates. At 68 dBA it is quiet enough to run while people are in the building.”

20 in
Pad size
2,200 rpm
Pad speed
70 lb
Pad pressure
24,000 sq ft/hr
Productivity
36 V
Wheel-drive system
Sulky
Ride-behind platform included

A 20 in wheel-drive battery burnisher with a ride-behind sulky

The NSS Charger 2022 DB is a 20 in battery burnisher that restores the wet-look gloss of floor finish without propane fumes or exhaust. A 2.5 hp, 36 V pad motor spins the pad at 2,200 rpm with 70 lb of pad pressure, a wheel drive with a twist-grip throttle moves the machine, and NSS rates it at 24,000 sq ft per hour.

This package adds the ride-behind sulky, so the operator can stand and ride on long runs instead of walking. It runs on six 6 V, 235 Ah AGM batteries with an onboard charger, so it plugs in at any standard outlet.

Condition: New.

NSS Charger 2022 DB battery burnisher with the ride-behind sulky platform attached at the rear

What you get

Cord-free burnishing, ready to charge

235 Ah AGM

36 V battery pack

Six 6 V sealed AGM batteries, with no cell caps to open or water to add.

Onboard

Battery charger

The charger is built in, so you can recharge anywhere there is a standard outlet.

Included

Sulky attachment

A ride-behind platform for the operator. It flips up and stores on the handle when you want to walk.

Captures the dust it makes

Burnishing turns worn floor finish into fine powder. The Vac-Trac dust control system built into the pad shroud channels that air into a filter bag that NSS says collects 99.5 percent of the dust, which helps protect indoor air quality.

Features

Built for daily commercial use

  • ✓Wheel drive with a twist-grip throttle reduces operator fatigue
  • ✓Machine controller protects the motor by stopping the pad if current gets too high, and a tilt switch prevents operation with the pad raised
  • ✓LED display shows battery charge and diagnostic codes when service is needed
  • ✓Lift-up top cover opens a wide battery compartment, with a drained battery tray underneath
  • ✓10-gauge powder-coated steel frame with a 12-gauge steel housing and ABS Flexiwall shield
NSS Charger 2022 DB battery burnisher, front three-quarter view showing the pad shroud, dust bag and battery housing

Choosing a Charger

Which battery Charger fits your building?

Charger 2022 ABLTCharger 2022 DB (this unit)Charger 2717 DB
Pad size20 in20 in27 in
Pad speed2,200 rpm2,200 rpm1,700 rpm
DrivePad assistWheel driveWheel drive
System24 V36 V36 V
Productivity16,300 sq ft/hr24,000 sq ft/hr32,342 sq ft/hr

Standing pad changes

Tip the machine back to reach the pad driver from a standing position. Change pads when they glaze over to keep the shine consistent.
NSS Charger 2022 DB tipped back with the 20 in burnishing pad facing out for a pad change

Specifications

NSS Charger 2022 DB at a glance

ModelsCharger 2022 DB, sulky
Pad size20 in (51 cm)
Pad speed2,200 rpm
Pad pressure70 lb (34 kg)
Pad motor2.5 hp (1,865 W), 36 V DC permanent magnet
Drive motor0.5 hp, 36 V DC permanent magnet
Batteries6 x 6 V, 235 Ah AGM (36 V system)
ChargerOnboard
Productivity24,000 sq ft/hr (2,230 m²)
Dust controlVac-Trac, 99.5% dust collection bag
Frame / housing10-gauge / 12-gauge powder-coated steel
Drive wheel / castersOne 10 in non-marking tire / two 6 in ball bearing casters
Sound level68 dBA
Dimensions (L x W x H)57 x 24 x 42 in (143 x 61 x 106 cm), without sulky
SulkyIncluded; flips up and stores on the handle
Model Numbers6402026 (Charger 2022 DB, 235 Ah AGM, 120 V, with sulky)

Technical specs may include optional equipment that is not included with all units.

Questions

NSS Charger 2022 DB: common questions

How long does it run on a charge?

NSS publishes up to 2.7 hours for the Charger 2022 DB on 220 Ah AGM batteries and up to 3.0 hours on 235 Ah batteries. Actual runtime depends on the floor and how long the pad is down.

Do the AGM batteries need watering?

No. AGM batteries are sealed and maintenance free, with no cell caps to remove.

How does the sulky work?

The sulky is a platform behind the machine that the operator stands on and rides. When you need to walk the machine through tight spaces, it flips up and stores on the handle.

How much floor can it burnish in an hour?

NSS rates the Charger 2022 DB at 24,000 sq ft per hour.

Can it polish concrete?

Yes. NSS says the Charger 2022 motor is powerful enough for concrete polishing with diamond pads, as well as restoring the luster of floor finish after scrubbing.

Not sure the Charger 2022 DB fits your floors?

Tell our team about the floor, the building and how often you burnish, and we will help you decide if this is the right machine.

Not Sure Which Machine Fits Your Floors?

Talk to a real SES tech about new, demo or certified reconditioned options, parts and service.

© 2026 Southeastern Equipment and Supply. All Rights Reserved.

Visa Discover AMEX Mastercard