| Models | Rider-M v2 30" Cylindrical |
| Cleaning Path | 30 in (762 mm) |
| Scrub Deck | Cylindrical, with debris hopper |
| Scrub Motors | (2) 0.75 hp (559 W) |
| Down Pressure | 130 lb (59 kg) |
| Squeegee Width | 41 in (104 cm) |
| Solution Tank | 45 gal (170 L) |
| Recovery Tank | 46 gal (174 L) |
| Demisting Chamber | 1.25 gal (4 L) |
| Vacuum | 0.8 hp (640 W), 24 V, 3-stage; 70 in (178 cm) water lift, 70 cfm |
| Batteries | 24 V DC; 240 Ah wet standard; AGM and lithium optional |
| Run Time | Up to 4 hr (continuous scrubbing, standard batteries, low down pressure) |
| Charger | Onboard, 27 A |
| Drive | 0.75 hp (559 W) front-wheel drive, all gear, sealed |
| Speed | 0-3.3 mph (0-5.3 km/h) |
| Productivity, Theoretical | 41,250 sq ft/hr (3,832 m²/hr) |
| Productivity, Practical | 19,500 sq ft/hr (1,811 m²/hr) |
| Step-Up Height | 17 in (43 cm) |
| Dimensions (L x W x H) | 63 x 35.8 x 52.5 in |
| Weight | 1,012 lb (459 kg) with batteries; 762 lb (346 kg) without |
| Chassis / Tanks | 3/16 in (4.8 mm) powder-coated steel; 5/16 in (7.9 mm) poly tanks |
| Model Numbers | XLRV2-30C |
Technical specs may include optional equipment that is not included with all units.
New Timberline Rider-M v2 30" Cylindrical Rider Floor Scrubber
Our Take (from the SES Sales Team)
“The Rider-M v2 30C is the larger cylindrical version of Timberline's mid-size ride-on scrubber. Its cylindrical deck scrubs a 30-inch path and sweeps loose debris into a hopper at the same time, which suits grouted tile, rubber flooring and the light debris found in warehouses, grocery stores and school hallways.
What stands out is the capacity behind that deck: 45 gallons of solution, 46 of recovery, 130 lb of down pressure and a 41-inch squeegee. Timberline rates it at 41,250 sq ft per hour theoretical, and the standard wet batteries give up to 4 hours of run time, with AGM and lithium packs as options. Controls stay simple, with an easy-scrub button, three water and three pressure settings and an eco mode.
The trade-off is size and upkeep. At 1,012 lb with batteries and almost 36 inches wide, it's built for open areas, and the hopper needs emptying along with the recovery tank. On smooth floors with little debris, a disk deck is simpler to look after.”
“I purchased 2 floor scrubbers from Southeastern and I couldn't be more happier. It has cut my labor cost in half and Darren was a great help in getting me the right equipment for my business needs.” — Otis J., Google review
A 30-inch cylindrical rider scrubber that sweeps and scrubs in one pass.
The Timberline Rider-M v2 30C is a battery-powered ride-on scrubber with a 30-inch (762 mm) cylindrical scrub deck. The cylindrical brushes scrub and sweep at the same time, collecting loose debris in a deck hopper, with two 0.75 hp scrub motors and 130 lb (59 kg) of down pressure. A 41-inch breakaway squeegee and a 3-stage, 0.8 hp vacuum with 70 in of water lift recover the water.
It carries 45 gal (170 L) of solution and 46 gal (174 L) of recovery, with a 1.25 gal demisting chamber. The standard 24 V, 240 Ah wet battery pack gives up to 4 hours of run time and charges from the onboard charger; AGM and lithium packs are options. Front-wheel drive moves it at up to 3.3 mph, and Timberline rates productivity at 41,250 sq ft per hour theoretical and 19,500 practical.
Includes:
- 24 V, 240 Ah wet battery pack
- Onboard 27 A charger
- 41 in squeegee
- Debris hopper
Features:
- Cylindrical deck scrubs and sweeps in one pass
- 45 gal solution and 46 gal recovery tanks
- Up to 4 hours of run time on standard wet batteries
- Easy-scrub button, three water and three pressure settings, eco mode
- All-steel frame with breakaway squeegee and flip-up bumper