| Models | ProBlitz XP |
| Airflow | 2,200 CFM (max) |
| Fan Speeds | 3 |
| Motor | 0.4 HP (360 W) capacitor start, 120 V, 60 Hz |
| Amp Draw | 2.4 A low / 2.7 A medium / 3.0 A high |
| Sound Level | 63 dBA low / 65 dBA medium / 66 dBA high |
| Drying Positions | 3 (0°, 60° and 90°) |
| Daisy Chain Outlets | 2 outlets, up to 2 additional air movers |
| Outlet Circuit Breaker | 8 A, on-board, resettable |
| Power Cord | 25 ft |
| Weight | 28 lb (12.7 kg) |
| Dimensions | 16.5 x 20 x 19.5 in |
| Housing | 2-piece high-impact polypropylene, built-in cord wrap |
| Blower Wheel | High-impact polypropylene |
| Transport | Telescoping handle and wheels |
| Storage | Stackable 2 high, top carry handle |
| Certifications | UL Listed, CSA Listed |
| Model Numbers | 107596 (model 1075961) |
Technical specs may include optional equipment that is not included with all units.
New ProTeam ProBlitz XP Air Mover
Our Take (from the SES Sales Team)
“The ProBlitz XP is ProTeam's 3-speed air mover for carpet cleaners, restoration crews and facility teams who dry carpet after extraction or deal with leaks and spills. It moves up to 2,200 CFM and sits in three positions, so you can push air across a floor, at a wall or up toward the ceiling.
What separates the XP from the standard ProBlitz is setup on the job. A telescoping handle and wheels let you roll it in, and two stacked units can be moved together. Two outlets on the front let you plug in up to 2 more air movers behind an on-board 8-amp breaker, and with a draw of 3.0 amps on high, three units can run from one wall outlet.
Plan your layout around the cord. It is 25 feet long, and ProTeam says not to use an extension cord with this air mover. The XP weighs the same 28 pounds as the standard model, so if you only need a fan you carry room to room, the base ProBlitz, with its 30-foot cord and no outlets, is the simpler choice.”
A 3-speed, 2,200 CFM air mover with a handle, wheels and daisy-chain outlets.
The ProTeam ProBlitz XP is a 3-speed air mover and carpet dryer rated at 2,200 CFM maximum airflow. Its 0.4 HP, 360-watt capacitor-start motor runs on 120 V and draws 2.4, 2.7 or 3.0 amps on low, medium and high, with sound levels of 63, 65 and 66 dBA. The motor is thermally protected and shuts down if it overheats.
The XP adds a telescoping handle, two wheels and two convenience outlets with an on-board 8-amp circuit breaker, so up to 2 additional air movers can run from the first unit. The two-piece high-impact polypropylene housing has a built-in cord wrap and a top carry handle, and units stack two high. It weighs 28 lb (12.7 kg) and is UL and CSA listed.
Includes:
- Telescoping handle and transport wheels
- 25 ft power cord
- Owner's manual
Features:
- Three fan speeds up to 2,200 CFM
- Two outlets run up to 2 more air movers, protected by an 8 A breaker
- Three operating positions for floors, walls and ceilings
- Telescoping handle and wheels for transport
- Stacks two high for storage