| Models | ProTeam ProBlitz |
| Airflow | 2,200 CFM (max) |
| Fan Speeds | 3 |
| Drying Positions | 0, 45 and 90 degrees |
| Motor | 0.4 HP (360 W), capacitor start, 120 V |
| Amperage | 2.4 A low, 2.7 A medium, 3.0 A high |
| Sound Level | 63 dBA low, 65 dBA medium, 66 dBA high |
| Weight | 28 lb (12.7 kg) |
| Power Cord | 30 ft |
| Housing | Two-piece high-impact polypropylene with built-in cord wrap |
| Blower Wheel | High-impact polypropylene |
| Storage | Stacks 2 high; top-mounted carry handle |
| Motor Protection | Automatic thermal shutoff |
| Dimensions | 16.5 x 20 x 19.5 in |
| Certifications | UL Listed, CSA Listed |
| Model Numbers | 107132 (Model 1071321) |
Technical specs may include optional equipment that is not included with all units.
New ProTeam ProBlitz Air Mover
Our Take (from the SES Sales Team)
“The ProBlitz is ProTeam's standard air mover, a 28-pound unit for drying carpet after extraction, drying hard floors after scrubbing, and moving air through a room after a spill or leak. It fits carpet cleaners, restoration contractors and in-house custodial teams that want dryers on hand.
Three fan speeds and three operating positions cover most drying jobs. Laid flat at 0 degrees it blows across carpet and floors, at 45 degrees it aims at walls and furniture, and at 90 degrees it works on ceilings and ventilation. ProTeam rates it at up to 2,200 CFM while drawing 2.4 to 3.0 amps, low enough that several units can share a circuit. The housing is high-impact polypropylene with a built-in cord wrap, and units stack two high in a closet or van.
Know what this model leaves out. The daisy-chain outlets, telescoping handle and wheels belong to the ProBlitz XP, so each ProBlitz plugs into its own outlet and gets carried by its top handle. If you set out several dryers on every job, the XP is worth a look.”
A three-speed, three-position air mover that stacks for storage.
The ProTeam ProBlitz is a three-speed air mover for drying carpet, hard floors and walls after cleaning, spills or water damage. Its 0.4 HP, 360 W capacitor-start motor moves up to 2,200 CFM and draws 2.4, 2.7 or 3.0 amps depending on speed. Sound levels run from 63 dBA on low to 66 dBA on high.
The unit sits at 0, 45 or 90 degrees to direct air across floors, at walls and furniture, or toward ceilings. The two-piece, high-impact polypropylene housing has a built-in cord wrap and a top-mounted carry handle, and units stack two high for storage. It weighs 28 lb, has a 30-foot cord, and its motor has automatic thermal protection.
Includes:
- 30 ft power cord
- Owner's manual
Features:
- Up to 2,200 CFM airflow
- Three fan speeds drawing 2.4 to 3.0 A
- Drying positions at 0, 45 and 90 degrees
- High-impact polypropylene housing with built-in cord wrap
- Stacks two high for storage