| Models | RX30C |
| Cleaning Width | 30 in (762 mm), dual cylindrical brushes |
| Brush Speed | 350 rpm |
| Squeegee Width | 42 in (1,067 mm), parabolic |
| Brush Motors | 2 x 500 W |
| Vacuum Motor | 500 W |
| Drive System | 800 W, single front-wheel drive |
| Debris Collection | Integrated dust collection hopper |
| Solution Tank | 25 gal (94.6 L) |
| Recovery Tank | 34 gal (128.7 L) |
| Battery | 24 V, 270 Ah AGM |
| Run Time | 5-6 hours |
| Productivity | Up to 46,000 sq ft/hr (4,274 m²/h) |
| Sound Level | < 63 dBA |
| Weight | 950 lb (431 kg) |
| Shipping Weight | 1,015 lb (460 kg) |
| Dimensions (L x W x H) | 53 x 32 x 45 in (135 x 81 x 114 cm) |
| Model Numbers | RX30C |
Technical specs may include optional equipment that is not included with all units.
New Onyx RX30C 30" Cylindrical Rider Floor Scrubber
Our Take (from the SES Sales Team)
“The RX30C is Onyx's cylindrical-brush rider, aimed at large floors that collect grit and small debris along with everyday dirt: warehouses, manufacturing plants, distribution centers, big-box back rooms and school cafeterias. Its two cylindrical brushes throw light debris into an on-board hopper while they scrub, so crews can usually skip the separate sweeping pass before scrubbing.
What stands out is pairing that hopper with a big tank and battery package. A 25-gallon solution tank, a 34-gallon recovery tank and a 24-volt, 270 Ah AGM pack rated for 5 to 6 hours let one operator cover a lot of ground, and Onyx rates it at up to 46,000 square feet per hour. Brushes come off without tools when they need cleaning or replacing.
The trade-off is that a cylindrical deck is built around brushes, not round pads. If your routine depends on swapping pads for different floor finishes, or your floors are smooth and mostly free of debris, the disk-deck RX26 is the simpler choice.”
A 30-inch cylindrical rider that picks up light debris as it scrubs.
The Onyx RX30C is a ride-on battery autoscrubber with a 30-inch cleaning path from dual cylindrical brushes turning at 350 rpm, driven by two 500-watt brush motors. An integrated dust collection hopper captures dust and light debris during operation, so pre-sweeping is not required, and the tool-free quick-change deck lets brushes come off in seconds. An 800-watt single front-wheel drive system moves the machine.
A 500-watt vacuum motor and 42-inch parabolic squeegee dry the floor without manual squeegee adjustment. The tanks hold 25 gallons of solution and 34 gallons of recovery, and a 24-volt, 270 Ah AGM battery pack is rated for 5 to 6 hours per charge. Onyx rates productivity at up to 46,000 sq ft per hour. The RX30C weighs 950 lb, measures 53 x 32 x 45 inches and runs under 63 dBA.
Includes:
- One set of cylindrical brushes
- 24 V AGM battery pack (270 Ah)
Features:
- Dual cylindrical brushes at 350 rpm
- Integrated dust hopper picks up light debris
- Tool-free quick-change brush deck
- 25-gallon solution and 34-gallon recovery tanks
- 24 V, 270 Ah AGM batteries rated for 5-6 hours