| Body | Roto-molded polyethylene |
| Solution tank | 10-gallon capacity (approx.) |
| Vacuum tank | 9-gallon capacity |
| Vacuum | Single 3 stage LA |
| CFM | 100 |
| H2O | 130 in |
| Pump | Diaphragm |
| PSI | 120 |
| GPM | 1.3 |
| Heater | 1200 W - 210 degree |
| Wheels | 12 in |
| Locking casters | 5 in |
| Power cord | Single 25' 12/3 |
| Amp draw | Cord one: 20 |
| Tools | 4" upholstery tool |
| Hose package | 15' vacuum and solution hose combo |
| Product weight | 120 lbs approx. |
| Shipping weight | 140 lbs |
| Product dimensions | 28 in x 18.5 in x 39 in |
| Shipping dimensions | 30 in x 19 in x 46.5 in |
Technical specs may include optional equipment that is not included with all units.
New Mytee Grand Prix Automotive Detailing Extractor, 10 gal., 120 PSI
Our Take (from the SES Sales Team)
“The HP120 Grand Prix is a workhorse for car washes, dealerships and detail shops that clean a lot of interiors in a day. The 10 gal solution and recovery tanks are the selling point: you can get through several vehicles before you need to dump and refill. Mytee's REAL HEAT system uses a 1,200 W in-line heater to bring solution up to 210°F, which helps break down the grease and body oils that build up on seats and carpets. A 120 PSI diaphragm pump feeds the tool, and a 3-stage vacuum pulls 100 CFM with 130 in of water lift. It does all of that on one 25 ft cord at 20 A, which matters in a bay where outlets are limited. Mytee also gave it built-in loading wheels for getting in and out of a vehicle without a ramp, waist-high switches and bucket-height drains. It comes ready to work with a 15 ft vacuum and solution hose, a 4 in Air Lite upholstery tool and a Heatguard hose wrap.”
A heated detail extractor sized for a busy bay
The Mytee HP120 Grand Prix is a heated automotive detailing extractor for car washes, dealerships and detail shops. Its 10 gal solution and recovery tanks let you work through several interiors between fills, and the REAL HEAT system heats solution to up to 210°F with a 1,200 W in-line heater.
A 120 PSI diaphragm pump and a 3-stage vacuum motor rated at 100 CFM and 130 in of water lift handle seats, carpets and mats, all on a single 25 ft power cord.
Condition: New.
What you get
Ready for the first interior
One cord, heat included
Features
Made for the detail bay
- ✓REAL HEAT system with a 1,200 W in-line heater, up to 210°F
- ✓Built-in loading wheels for loading and unloading without a ramp
- ✓See-through vacuum tank lid
- ✓Waist-high switches and bucket-height drains
- ✓Roto-molded polyethylene body on 10 in foam-filled wheels and 4 in locking casters
Built-in loading wheels
Wheels built into the body make loading and unloading the HP120 easier, without a ramp.
Compare
Mytee detailing extractors
| Model | Solution / recovery | Pump | Heat | Water lift | Net weight |
|---|---|---|---|---|---|
| S-300 Tempo | 1 / 1 gal | 55 PSI | None | 85 in | 27 lb (12.2 kg) |
| HP120 Grand Prix (this unit) | 10 / 10 gal | 120 PSI | 1,200 W in-line | 130 in | 109 lb (49.4 kg) |
| 80-120 Prep Center S | 12 / 12 gal | 120 PSI | 1,200 W in-line | 130 in | 144 lb (65.3 kg) |
The Prep Center S adds dry vacuuming, a blower and three air-powered chemical sprayers to the hot water extraction of the HP120.
Specifications
Mytee HP120 Grand Prix at a glance
| Models | HP120 Grand Prix |
|---|---|
| Solution / recovery tanks | 10 gal (37.9 L) / 10 gal (37.9 L) |
| Vacuum motor | One 3-stage, 100 CFM |
| Water lift | 130 in |
| Solution pump | Diaphragm, 120 PSI, 1.3 GPM |
| Heater | REAL HEAT 1,200 W in-line, 210°F max |
| Power cord | Single 25 ft (7.6 m) 12/3 |
| Amp draw (115 V) | 20 A |
| Wheels / casters | 10 in (25.4 cm) foam-filled rear wheels / 4 in (10 cm) locking front casters |
| Body | Roto-molded polyethylene |
| Dimensions | 28 x 18.5 x 39 in (71 x 47 x 99 cm) |
| Net weight | 109 lb (49.4 kg) |
| Shipping weight | 120 lb (54.4 kg) |
| Model Numbers | HP120 (Grand Prix, with 8400P Air Lite upholstery tool, 115 V) |
Technical specs may include optional equipment that is not included with all units.
Questions
Mytee HP120 Grand Prix: common questions
What power does the HP120 need?
One 25 ft cord drawing 20 A at 115 V runs the pump, vacuum and heater together, so plan on a 20 A circuit.
How hot does the solution get?
The REAL HEAT 1,200 W in-line heater brings solution up to 210°F.
Which upholstery tool comes with it?
This model comes with the 8400P Air Lite 4 in upholstery tool. Mytee also sells the HP120-SS, which comes with a stainless steel tool.
How do I empty it?
The drains sit at bucket height, so you can empty the recovery tank straight into a standard bucket.
Is a 230 V version available?
Mytee builds a 230 V 50/60 Hz version. This listing is the standard 115 V model, so ask us if you need the 230 V unit.
Not sure the HP120 fits your shop?
Tell our team how many vehicles you detail and what your bay looks like, and we will help you decide if this is the right extractor.
