| Maximum pressure | 1,500+ PSI |
| Amp Draw (220-140V 50Hz) | 5A, 10A, 15A, or 20A - four switches |
| Amp Draw (110-120V 60Hz) | 10A, 20A, 30A, or 40A - four switches |
| Maximum temperature | 210 F |
| Maximum watts | 4800 Watt (4 x 1200W) |
| Power cord | Dual 25' 12/3 |
| Product dimensions | 11 1/2" x 12 1/2" x 11" |
| Shipping weight | 34 lbs |
| Shipping dimensions | 18 3/4" x 7" x 8 1/2" |
New Mytee Mytee Hot Twin Turbo, 4,800 total watts
Our Take (from the SES Sales Team)
“The Hot Twin Turbo is for cleaners who want serious heat from a cold-water portable or an electric truckmount. It connects in the solution line between the machine and the tool and puts out up to 4,800 W of heat, for a maximum of 210°F, and it is rated for up to 1,500 PSI. Four water-resistant switches step the heat in 1,200 W stages: 1,200, 2,400, 3,600 or 4,800 W. Each switch draws 10 A at 115 V, and the heater has two lighted 25 ft cords, which Mytee says must go to two separate circuits. That lets you match the heat to the power you have on site and back it off if a breaker is shared. The housing is polyethylene with a built-in handle and brass fittings, and the whole unit is 11.5 x 12.5 x 11 in and 30 lb, so it is easy to carry in and set beside your extractor. If you only have one circuit to spare, the single-cord Hot Turbo gives you up to 2,400 W.”
Twice the heat for cold-water extractors
The Mytee 480-120 Hot Twin Turbo is a portable in-line water heater that connects to a cold-water extractor or truckmount to produce hot water. Four water-resistant switches select 1,200, 2,400, 3,600 or 4,800 W of heat, for a maximum of 210°F, and it is rated for up to 1,500 PSI.
Two lighted 25 ft power cords spread the load across two circuits, and the polyethylene housing has a built-in carrying handle and brass fittings.
Condition: New.
How it connects
Three steps to hot water
Two cords, two circuits
Features
Serious portable heat
- ✓Four water-resistant 1,200 W switches, up to 4,800 W
- ✓Up to 210°F maximum temperature
- ✓Rated for pressures up to 1,500 PSI
- ✓Durable polyethylene housing with a built-in handle and brass fittings
- ✓Dual lighted 25 ft power cords
Compare
Mytee Hot heaters
| Model | Heat output | Switch settings | Power cords | Amp draw (115 V) | Net weight |
|---|---|---|---|---|---|
| 240-120 Hot Turbo | 2,400 W (4 x 600 W) | 600 / 1,200 / 1,800 / 2,400 W | Single 25 ft 12/3 | 5 to 20 A | 26 lb (11.8 kg) |
| 480-120 Hot Twin Turbo (this unit) | 4,800 W (4 x 1,200 W) | 1,200 / 2,400 / 3,600 / 4,800 W | Dual 25 ft 12/3 | 10 to 40 A total | 30 lb (13.6 kg) |
Specifications
Mytee 480-120 Hot Twin Turbo at a glance
| Models | 480-120 Hot Twin Turbo |
|---|---|
| Heat output | 4,800 W max (4 x 1,200 W) |
| Max temperature | 210°F |
| Max pressure | 1,500 PSI |
| Power cords | Dual 25 ft (7.6 m) 12/3, lighted |
| Amp draw (115 V) | 10 A per switch: 10, 20, 30 or 40 A total |
| Fittings | Brass; input hose with male quick connect, female quick-connect output |
| Body | Polyethylene with built-in handle |
| Dimensions | 11.5 x 12.5 x 11 in (29.2 x 31.8 x 27.9 cm) |
| Net weight | 30 lb (13.6 kg) |
| Shipping weight | 34 lb (15.4 kg) |
| Model Numbers | 480-120 (Mytee Hot Twin Turbo, 115 V) |
Technical specs may include optional equipment that is not included with all units.
Questions
Mytee Hot Twin Turbo: common questions
Will it work with my extractor or truckmount?
Mytee designed it to connect to any cold-water extractor, and the manual covers truckmounts too. It is rated for pump pressures up to 1,500 PSI.
What power does it need?
Two 25 ft cords on two separate circuits. Each switch draws 10 A at 115 V, so all four switches draw 40 A in total.
How hot will the water get?
Up to 210°F. The temperature at the tool depends on how many switches you run, your flow rate and your hose length.
How do I avoid vapor lock?
Prime the pump first: run the pump and hold the tool trigger until steady water flows, then switch on the heaters.
Not sure which heater fits your setup?
Tell our team about your extractor and your power on site, and we will help you choose between the Hot Twin Turbo and the Hot Turbo.
