| Amps | 5A, 10A, 15A, or 20A - four switches |
| Maximum pressure | 500 PSI |
| Maximum temperature | 210 degree |
| Maximum watts | 2,400 (4 x 600W) |
| Power cord | Single 25 ft 12/3 |
| Product dimensions | 11.5 in x 12.5 in x 11 in |
| Shipping weight | 32 lbs |
| Shipping dimensions | 18.75 in x 7 in x 8.5 in |
New Mytee Mytee Hot Turbo, 2,400 total watts
Our Take (from the SES Sales Team)
“The Hot Turbo is the easy way to add heat to a cold-water extractor you already own. It sits in the solution line between the extractor and the wand and adds up to 2,400 W of heat, with a maximum of 210°F, and it is rated for pump pressures up to 1,500 PSI, so it can handle high-pressure portables too. What we like is the control. Four switches let you choose 600, 1,200, 1,800 or 2,400 W, and each switch draws 5 A at 115 V. On a job where the only outlet shares a circuit with your extractor, you can run one or two switches and still get some heat; on a dedicated 20 A circuit you can run all four. It runs on a single 25 ft cord, weighs 26 lb and is only 11.5 x 12.5 x 11 in, so it rides along in the van without taking much room. If you need more heat, the Hot Twin Turbo doubles the output to 4,800 W on two cords.”
Add heat to any cold-water extractor
The Mytee 240-120 Hot Turbo is a portable in-line water heater that connects to a cold-water extractor or truckmount to produce hot water. Four switches select 600, 1,200, 1,800 or 2,400 W of heat, for a maximum of 210°F, and it is rated for up to 1,500 PSI.
It runs on a single 25 ft power cord and weighs 26 lb, so it is easy to carry to the job and set up beside your extractor.
Condition: New.
How it connects
Three steps to hot water
Match the heat to your circuit
Features
Simple, portable heat
- ✓Four switches select 600, 1,200, 1,800 or 2,400 W of heat
- ✓Up to 210°F maximum temperature
- ✓Rated for pressures up to 1,500 PSI
- ✓Input hose with male quick connect and female quick-connect output fitting
- ✓Built-in carrying handle and a single 25 ft cord
Compare
Mytee Hot heaters
| Model | Heat output | Switch settings | Power cords | Amp draw (115 V) | Net weight |
|---|---|---|---|---|---|
| 240-120 Hot Turbo (this unit) | 2,400 W (4 x 600 W) | 600 / 1,200 / 1,800 / 2,400 W | Single 25 ft 12/3 | 5 to 20 A | 26 lb (11.8 kg) |
| 480-120 Hot Twin Turbo | 4,800 W (4 x 1,200 W) | 1,200 / 2,400 / 3,600 / 4,800 W | Dual 25 ft 12/3 | 10 to 40 A total | 30 lb (13.6 kg) |
Specifications
Mytee 240-120 Hot Turbo at a glance
| Models | 240-120 Hot Turbo |
|---|---|
| Heat output | 2,400 W max (4 x 600 W) |
| Max temperature | 210°F |
| Max pressure | 1,500 PSI |
| Power cord | Single 25 ft (7.6 m) 12/3 |
| Amp draw (115 V) | 5 A per switch: 5, 10, 15 or 20 A |
| Fittings | Input hose with male quick connect; female quick-connect output |
| Dimensions | 11.5 x 12.5 x 11 in (29.2 x 31.8 x 27.9 cm) |
| Net weight | 26 lb (11.8 kg) |
| Shipping weight | 30 lb (13.6 kg) |
| Model Numbers | 240-120 (Mytee Hot Turbo, 115 V) |
Technical specs may include optional equipment that is not included with all units.
Questions
Mytee Hot Turbo: common questions
Will it work with my extractor?
Mytee designed the Hot Turbo to connect to any cold-water extractor, and it is rated for pump pressures up to 1,500 PSI.
How hot will the water get?
Up to 210°F. The temperature at the tool depends on how many switches you run, your flow rate and your hose length.
What power does it need?
One 25 ft cord. Each switch draws 5 A at 115 V, so all four switches draw 20 A.
How do I avoid vapor lock?
Prime the pump first: run the pump and hold the tool trigger until steady water flows, then switch on the heaters.
Not sure which heater fits your setup?
Tell our team about your extractor and your power on site, and we will help you choose between the Hot Turbo and the Hot Twin Turbo.
