| Handle | |
| Machine Weight | 3.5kg (7.7lb) in Lightweight model 5.3kg (11.7lb) in Heavyweight mode |
| Telescopic Handle | 70 - 140cm (27.6 - 55.1in) |
| Operation | Easy press-and-go controls |
| User Comfort | Soft rubber grips |
| Head | |
| Cleaning Width | 250mm (9.8in) |
| Scrubbing Power | 5000 rpm motor, up to 83 scrubs per second |
| Head Height | 105mm (4.1in) |
| Wing Height | 50mm (1.9in) |
Technical specs may include optional equipment that is not included with all units.
New MotorScrubber SHOCK NO BACKPACK
Our Take (from the SES Sales Team)
“This is the full SHOCK machine, head and handle, without the battery backpack. It makes sense for teams that already run a MotorScrubber backpack from a JET3 or STORM and want SHOCK's low-profile oscillating clean on the same power source. SHOCK's head is only 4.1 in tall with 1.9 in wings, so it cleans under cubicle partitions, around toilets, along baseboards and up stairs where a floor scrubber cannot go. A 5,000 rpm brushless motor drives up to 83 scrubs per second across a 9.8 in cleaning width. The MAGPlate magnetic pad holder locks on hands-free, so operators can carry color-coded pads for different areas and swap them without touching a dirty pad. Drop in the quick-change weight kit for 4 lb of extra down-force on floors, or take it out for stairs and baseboards. The telescopic handle adjusts from 27.6 to 55.1 in. The kit includes the pad holder, the weight kit and a starter set of pads. If you need the backpack too, the SHOCK Starter Kit has it.”
The SHOCK oscillating machine, without the backpack
MotorScrubber SHOCK is a low-profile oscillating cleaning machine for floors, edges, baseboards, stairs, risers and the areas under obstacles that larger machines miss. A 5,000 rpm brushless digital motor drives up to 83 scrubs per second, and soft glide wheels let the pad clean right into edges and corners.
This kit is the complete SHOCK machine with handle, MAGPlate pad holder, weight kit and starter pads. It runs from a MotorScrubber battery backpack, which is not included.
Condition: New.
What you get
Machine, pad holder, weight kit and pads
Two machines in one
Features
Lowest profile, every edge
- ✓Patented rubber glide wheels keep the drive about 2 mm (0.08 in) from walls while the pad cleans into the edge
- ✓Head pivots 90 degrees to move from stair tread to riser
- ✓Down-force yoke applies pressure through the center of the head
- ✓On-demand spray through a high-pressure pump for an even, targeted application
- ✓Cast zinc alloy chassis and cast aluminum oscillating drive, tested for over 1,500 hours
Accessories
Pads and parts for SHOCK
| SHOCK accessory | Part number | Use |
|---|---|---|
| MAGPlate pad holder (standard) | 011-0074 | Magnetic pad holder that locks onto the oscillating drive |
| Weight kit | 011-0004 | Adds 4 lb (1.8 kg) of down-force |
| SHOCK pad | 011-0070 | Washable, non-scratch pad for smooth and textured hard floors |
| Microfiber pad | 011-0071 | Maintenance cleaning on hard floors and carpet, washable up to 300 times |
| Green thinline scrubbing pad (10 pack) | 011-0072-10 | Greasy kitchens and industrial soil |
| Melamine pad (10 pack) | 011-0075-10 | Scuffs and marks on hard floors, using only water |
| Maroon stripping pad (10 pack) | 011-0073-10 | Dry stripping and restoring vinyl, Altro, concrete and stone |
Specifications
MotorScrubber SHOCK at a glance
| Models | SHOCK, no backpack |
|---|---|
| Cleaning width | 9.8 in (250 mm) |
| Motor | 5,000 rpm brushless digital motor |
| Scrubbing action | Oscillating, up to 83 scrubs per second |
| Head height | 4.1 in (105 mm) |
| Wing height | 1.9 in (50 mm) |
| Chassis | Cast zinc alloy chassis with cast aluminum oscillating drive |
| Machine weight | 7.7 lb (3.5 kg) lightweight mode; 11.7 lb (5.3 kg) heavyweight mode |
| Telescopic handle | 27.6 to 55.1 in (70 to 140 cm) |
| Weight kit | 4 lb (1.8 kg), quick change |
| Controls | Press-and-go, soft rubber grips |
| Power source | MotorScrubber battery backpack (not included) |
| Model Numbers | MSSHOCKHH (SHOCK with handle, MAGPlate pad holder, weight kit and pads; no backpack) |
Technical specs may include optional equipment that is not included with all units.
Questions
MotorScrubber SHOCK: common questions
What do I need to run it?
A MotorScrubber battery backpack for power and solution. MotorScrubber says the JET3 backpack is compatible with SHOCK.
What floors can SHOCK clean?
MotorScrubber lists Altro and safety flooring, carpet, concrete, epoxy, hardwood, laminate, marble, metal, stone, terrazzo, tile and grout, and vinyl or LVT.
Can it clean stairs and baseboards?
Yes. Remove the weight kit for lightweight mode, and the head pivots 90 degrees to move from tread to riser.
How do pad changes work?
Lay the MAGPlate pad holder on the floor and lower the head onto it. Neodymium magnets lock it in place, so you never handle a dirty pad.
Not sure SHOCK fits your cleaning job?
Tell our team what you need to clean and which MotorScrubber equipment you already own, and we will help you pick the right kit.
