| Models | EDIC Endeavor 9000i-HSH |
| Capacity | 13 gal |
| Solution Pressure | Adjustable, 70-1200 psi |
| Heater | 2000 W in-line, operates at 500 psi and below |
| Vacuum | 8.4 in diameter Infinity design |
| Water Lift | 147 in |
| Airflow | 142 CFM |
| Air Watts | 673 |
| Auto-Fill / Auto-Dump | Yes, 3/4 in garden hose connections |
| Power Cords | Dual 25 ft detachable, GFCI, PowerCon twist-lock |
| Electrical | 120 V, cords on two separate circuits (built-in circuit sensor) |
| Vacuum Hose Connection | 1.5 in |
| Pump Controls | Power prime and pressure relief valve |
| Rear Wheels | 12 in, non-marking |
| Front Casters | Dual-wheel |
| Frame | Upright dolly style, handle casters, molded skid rails |
| Storage | Wand / tool caddy, 5-gallon bucket holder |
| Weight | 174 lb |
| Model Numbers | 9000i-HSH (machine only, with 2000 W heater) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Endeavor 9000i-HSH 13 Gallon Heated Multi-Surface Cleaner
Our Take (from the SES Sales Team)
“The Endeavor 9000i-HSH is the heated version of EDIC's upright multi-surface cleaner, aimed at facilities and contractors who want hot-water carpet and upholstery extraction plus high-pressure tile and grout cleaning from one machine. It carries 13 gallons, has a 2000-watt in-line heater, and its 8.4-inch Infinity vacuum is rated at 147 inches of water lift and 142 CFM.
The heater is the reason to choose it over the 9000i-HS. It works at 500 psi and below, which is the carpet and upholstery range, and EDIC allows up to 3 minutes to preheat. Above 500 psi the heater is disabled, so high-pressure tile and grout work runs without heat. Auto-fill and auto-dump, a tool caddy and 12-inch rear wheels keep setup and loading quick.
Plan on two separate circuits for the dual power cords; the heater won't run on one, and the built-in circuit sensor confirms when you have them. This listing is the machine only, so add hoses and tools, or look at the Endeavor kits.”
A heated 13-gallon multi-surface cleaner for carpet, upholstery, tile and grout.
The EDIC Endeavor 9000i-HSH is the heated version of the Endeavor upright multi-surface cleaner, for heated carpet and upholstery extraction, hard surface restoration and, with optional tools, touch-free restroom cleaning. It has a 13-gallon capacity, a 2000-watt in-line heater, a pump adjustable from 70 to 1200 psi, and an 8.4-inch Infinity design vacuum rated at 147 inches of water lift, 142 CFM and 673 air watts. This listing is the machine only.
EDIC's manual says the heater operates at 500 psi and below, and only when both power cords are on separate circuits. The dual 25 ft detachable GFCI cords use PowerCon twist-lock connectors, and a circuit sensor light confirms the two circuits. Auto-fill and auto-dump use 3/4-inch garden hoses. The machine has a fan-cooled motor compartment, a tool caddy, a 5-gallon bucket holder, 12-inch non-marking rear wheels and molded skid rails, and weighs 174 lb.
Includes:
- Endeavor 9000i-HSH multi-surface cleaner with 2000 W heater
- Dual 25 ft detachable GFCI power cords
Not included: Hoses, wands and cleaning tools, sold separately
Features:
- 2000 W in-line heater for carpet and upholstery work
- Pump adjusts from 70 to 1200 psi
- 8.4 in Infinity vacuum with 147 in water lift
- Auto-fill and auto-dump with garden hose connections
- Dual GFCI power cords with built-in circuit sensor