| Models | EDIC Bravo 339MH-HT |
| Solution Tank | 3 gal (11.4 L) |
| Recovery Tank | 3.5 gal (13.2 L) |
| Solution Pressure | 55 psi |
| Vacuum Motor | 2-stage bypass |
| Water Lift | 106 in (264 mbar) |
| Heater | 1500 W in-tank, stainless steel |
| Electrical Draw | 15 A, 120 V |
| Hose Assembly | 8 ft (2.4 m) vacuum and solution line with quick connects |
| Upholstery Tool | Stainless steel |
| Power Cord | 25 ft (7.6 m) |
| Handle | Retractable, adjusts 22 to 37 in |
| Wheels | 6 in non-marking |
| Construction | Polyethylene |
| Dimensions (H x L x W) | 20.5 x 15 x 13 in |
| Weight | 19 lb (8.6 kg) |
| Shipping Weight | 27 lb (12.2 kg) |
| Shipping Dimensions (H x L x W) | 23 x 18 x 15.5 in |
| Model Numbers | 339MH-HT (heated Bravo with 8 ft hose assembly and stainless steel upholstery tool; printed 300MH-HT on the EDIC spec sheet) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Bravo 339MH-HT Heated Spotter Extractor with Upholstery Tool
Our Take (from the SES Sales Team)
“The 339MH-HT is the Bravo for people who want heated extraction in a 19 lb package. Upholsterers, detailers, hotel housekeeping and carpet cleaners reach for a spotter like this for furniture, stairs, spots and vehicle interiors, and warm solution helps loosen greasy soil and older stains.
The 1500 W heater sits in the solution tank, and the machine comes with an 8 ft hose and a stainless steel upholstery tool, so it is ready to work. The rest is the same Bravo: 3 gallons of solution, a larger 3.5-gallon recovery tank, 55 psi and 106 inches of water lift, with holders for two spray bottles on top.
The trade-off is how the heat works. EDIC's operator manual has you pre-heat the tank before cleaning, which can take 5 to 10 minutes depending on the starting water temperature, and the heater and vacuum don't run at the same time. Starting with warm tap water shortens the wait. If you need continuous on-demand heat, an extractor with an external in-line heater is the better fit.”
The heated Bravo spotter, with a 1500 W in-tank heater, 8 ft hose assembly and stainless steel upholstery tool.
The EDIC Bravo 339MH-HT is the heated version of EDIC's 3-gallon spotter and upholstery extractor. A 1500 W stainless steel in-tank heater warms the solution, which EDIC rates at 150-degree heat, and the unit comes with an 8 ft vacuum and solution hose assembly and a stainless steel upholstery tool. It sprays at 55 psi and pulls 106 inches of water lift from a 2-stage bypass vacuum.
The Bravo weighs 19 lb and rolls on 6-inch non-marking wheels, with a retractable handle that adjusts from 22 to 37 inches. Molded-in holders carry two spray bottles, and the 3.5-gallon recovery tank unlatches and dumps through the vacuum port, with a porthole for cleaning. The heated model draws 15 A on a standard 120 V circuit, compared with 12 A for the non-heated Bravo.
Includes:
- Bravo 339MH-HT heated spotter
- 8 ft vacuum and solution hose assembly
- Stainless steel upholstery tool
- 25 ft power cord
Features:
- 1500 W stainless steel in-tank heater
- Includes 8 ft hose assembly and stainless steel upholstery tool
- 3 gal solution and 3.5 gal recovery tanks
- 55 psi pump with 106 in of water lift
- Weighs 19 lb, with 6 in wheels and a 22 to 37 in handle