| Models | EDIC Bravo 300MH-HT-K |
| Solution Tank | 3 gal (11.4 L) |
| Recovery Tank | 3.5 gal (13.2 L) |
| Solution Pressure | 55 psi |
| Vacuum Motor | 2-stage bypass |
| Water Lift | 106 in (264 mbar) |
| Heater | 1500 W in-tank, stainless steel |
| Electrical Draw | 15 A, 120 V |
| Hose Assembly | 8 ft (2.4 m) vacuum and solution line with quick connects |
| Upholstery Tool | Stainless steel |
| Carpet Wand | 10 in stainless steel, single jet |
| Power Cord | 25 ft (7.6 m) |
| Handle | Retractable, adjusts 22 to 37 in |
| Wheels | 6 in non-marking |
| Construction | Polyethylene |
| Dimensions (H x L x W) | 20.5 x 15 x 13 in |
| Spotter Weight | 19 lb (8.6 kg) |
| Model Numbers | 300MH-HT-K (heated Bravo 339MH-HT, 8 ft hose assembly, stainless steel upholstery tool, 10 in carpet wand) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Bravo 300MH-HT-K Heated Spotter Extractor Kit with Upholstery Tool and Carpet Wand
Our Take (from the SES Sales Team)
“This kit is the heated Bravo packaged with an 8 ft hose, a stainless steel upholstery tool and a 10-inch carpet wand. It suits carpet cleaners who want a light second unit for spots and furniture, and facility or hotel staff who handle carpet spots, chairs and stairs with one small machine.
The 10-inch single-jet wand covers spots and small carpeted areas, and the upholstery tool handles furniture, stairs and vehicle interiors. The 1500 W in-tank heater, 55 psi pump and 106 inches of water lift are the same as on the heated 339MH-HT; this kit simply adds the carpet wand.
Plan for the pre-heat. EDIC's operator manual has you heat the tank before cleaning, which takes 5 to 10 minutes depending on the water you start with, and the heater and vacuum don't run at the same time. Also keep the job sized to the machine: a 10-inch wand on a 3-gallon spotter is for small areas, and whole rooms go faster with a larger extractor.”
The heated Bravo spotter kit, with an upholstery tool, a 10-inch carpet wand and an 8 ft hose assembly.
The EDIC Bravo 300MH-HT-K kit is the heated Bravo spotter packaged with an 8 ft vacuum and solution hose assembly, a stainless steel upholstery tool and a 10-inch stainless steel single-jet carpet wand. A 1500 W stainless steel in-tank heater warms the solution, which EDIC rates at 150-degree heat.
The Bravo holds 3 gallons of solution and recovers into a 3.5-gallon tank, spraying at 55 psi with 106 inches of water lift from a 2-stage bypass vacuum. It weighs 19 lb, rolls on 6-inch non-marking wheels and has a retractable handle that adjusts from 22 to 37 inches. Molded-in holders carry two spray bottles, and the heated model draws 15 A on a standard 120 V circuit.
Includes:
- Bravo heated spotter with 1500 W in-tank heater
- 8 ft vacuum and solution hose assembly
- Stainless steel upholstery tool
- 10 in stainless steel single-jet carpet wand
- 25 ft power cord
Features:
- Heated Bravo spotter with 1500 W in-tank heater
- Includes 10 in stainless steel single-jet carpet wand
- Stainless steel upholstery tool and 8 ft hose assembly
- 3 gal solution and 3.5 gal recovery tanks
- Weighs 19 lb, with 6 in wheels and a retractable handle