| Models | EDIC Galaxy 2000SX-HR-WK |
| Solution Tank | 12 gal (45.4 L) |
| Recovery Tank | 11 gal (41.6 L) |
| Solution Pressure | 100 psi |
| Vacuum Motors | Dual 2-stage |
| Water Lift | 150 in (374 mbar) |
| Airflow | 90 CFM |
| Electrical | 13.5 A, standard 15 A, 120 V circuit |
| Power Cord | 50 ft (15.2 m), detachable |
| Carpet Wand | Glidemaster stainless steel, single bend, single jet, Teflon wand glide |
| Hose | 15 ft vacuum and solution hose assembly |
| Heat | Heat-ready; Heat N'Run external heater not included |
| Construction | Polyethylene body, 1/4 in aluminum baseplate |
| Wheels | 10 in non-marking rear wheels, 4 in locking front casters |
| Extractor Dimensions (H x L x W) | 35 x 31 x 18 in |
| Extractor Weight | 80 lb (36.3 kg) |
| Model Numbers | 2000SX-HR-WK (Galaxy 2000SX-HR extractor, Glidemaster wand, 15 ft hose assembly) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Galaxy 2000SX-HR-WK Heat-Ready Carpet Extractor Kit with Glidemaster Wand
Our Take (from the SES Sales Team)
“This kit pairs the 100 psi Galaxy 2000SX-HR with the tools to start cleaning: a single-bend, single-jet Glidemaster stainless steel wand with a Teflon glide and a 15-foot hose assembly. It fits a facility crew or a smaller contractor who wants a complete 12-gallon portable setup and plans to clean cold for now.
The machine is the same Galaxy 2000SX: 12-gallon solution and 11-gallon recovery tanks, dual 2-stage vacuums with 150 inches of water lift, and a 13.5-amp draw on one 50-foot cord. Its heat-ready brackets let you add EDIC's Heat N'Run heater later without replacing anything, and the heater lifts off for service while the extractor keeps working.
The trade-off is reach and heat. Fifteen feet of hose keeps you close to the machine, and there's no heater in the box. If you want hot water from day one, the 2000SX-HRH-WK kit adds the 2000-watt heater; for longer hose runs and more pressure, look at the 220 psi Galaxy 2000IX kits with 25-foot hoses.”
The 100 psi Galaxy 2000 with a Glidemaster wand and 15-foot hose, ready to add heat later.
The EDIC Galaxy 2000SX-HR-WK is a carpet cleaning kit built on the Galaxy 2000SX-HR portable extractor: a 12-gallon (45.4 L) solution tank, an 11-gallon (41.6 L) recovery tank, a 100 psi pump and dual 2-stage vacuum motors with 150 inches of water lift and 90 CFM. The extractor runs on a single 50-foot detachable cord at 13.5 amps.
The kit adds a Glidemaster stainless steel carpet wand with a single bend, single jet and Teflon wand glide, plus a 15-foot vacuum and solution hose assembly. The extractor is heat-ready, with brackets on the back for EDIC's Heat N'Run external heater; the heater is not included in this kit.
Includes:
- Galaxy 2000SX-HR heat-ready extractor
- Glidemaster single-bend, single-jet stainless steel carpet wand
- Teflon wand glide
- 15 ft vacuum and solution hose assembly
- 50 ft detachable power cord
Not included: Heat N'Run external heater, sold separately
Features:
- Glidemaster single-jet stainless steel wand and 15 ft hose included
- 12 gal solution and 11 gal recovery tanks
- 100 psi pump with dual 2-stage vacuum motors and 150 in water lift
- Heat-ready brackets accept EDIC's Heat N'Run heater later
- Runs on one 50 ft cord at 13.5 A