| Models | EDIC Galaxy 2000CX-HRH-WK Kit |
| Extractor | Galaxy 2000CX-HR, heat-ready |
| Solution / Recovery Tanks | 12 gal / 11 gal |
| Solution Pressure | Adjustable, up to 500 psi |
| Vacuum Motors | Dual 3-stage, 190 in water lift |
| Airflow | 100 CFM |
| Extractor Electrical Draw | 17.1 A (20 A circuit required) |
| Heater | Heat N'Run external, 2000 W, 16.6 A |
| Heater Power Cord | 50 ft, detachable |
| Heat-Up Time | 1.5 to 3 minutes |
| Wand | Glidemaster 12 in, dual jet, S-bend, stainless steel |
| Wand Weight | 7.4 lb |
| Wand Length | 60 in |
| Wand Valve | 1200 psi brass angle valve |
| Wand Glide | Teflon |
| Hose Assembly | 25 ft vacuum hose and high-pressure solution line |
| Extractor Power Cord | 50 ft, detachable |
| Extractor Dimensions (H x L x W) | 35 x 31 x 18 in |
| Extractor Weight | 89 lb |
| Model Numbers | 2000CX-HRH-WK (Galaxy 2000CX-HR extractor, 2000 W Heat N'Run heater, Glidemaster 12 in dual-jet wand for 500 psi units, 25 ft hose assembly) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Galaxy 2000CX-HRH-WK 500 PSI Carpet Extractor Kit with Heater and Glidemaster Wand
Our Take (from the SES Sales Team)
“This kit is EDIC's ready-to-work package around the Galaxy 2000CX-HR, built for carpet cleaning contractors and facility teams who want hot-water extraction from a portable unit. It pairs the 12-gallon, 500 psi extractor with a 2000-watt Heat N'Run external heater, a Glidemaster stainless steel carpet wand and a 25 ft vacuum hose and solution line.
The Glidemaster is the traditional choice: a 12-inch, dual-jet, S-bend stainless wand with a 1.5-inch polished stainless vacuum tube, a 1200 psi brass angle valve and a Teflon glide that helps it slide across the carpet. The heater hangs on the back of the extractor, keeps heat out of the motor compartment, and comes up to temperature in about 1.5 to 3 minutes.
Plan for power before the first job: the extractor needs a 20 amp circuit, and EDIC says the heater must plug into a separate outlet on a separate circuit. At 7.4 lb the Glidemaster is heavier than the 6.5 lb Triton in the 2000CX-HRH-TK kit.”
A complete 500 psi hot-water carpet cleaning kit with a stainless Glidemaster wand.
The EDIC 2000CX-HRH-WK kit combines the Galaxy 2000CX-HR heat-ready portable extractor with a 2000-watt Heat N'Run external heater, a Glidemaster double-bend dual-jet stainless steel carpet wand with Teflon glide, and a 25 ft vacuum hose and high-pressure solution line. The extractor has 12-gallon solution and 11-gallon recovery tanks, a pump adjustable up to 500 psi, and dual 3-stage vacuum motors with 190 inches of water lift.
The Heat N'Run heater mounts on built-in brackets, delivers 200+ degree solution and runs on its own 50 ft power cord. The Glidemaster wand has a 12-inch head, 60-inch length and 1.5-inch polished stainless vacuum tube, weighs 7.4 lb, and uses a 1200 psi brass angle valve. The extractor draws 17.1 amps and requires a 20 amp circuit.
Includes:
- Galaxy 2000CX-HR heat-ready extractor
- Heat N'Run 2000 W external heater with 50 ft power cord
- Glidemaster 12" dual-jet S-bend stainless steel carpet wand
- Teflon wand glide
- 25 ft vacuum hose and high-pressure solution line
Features:
- Galaxy 2000CX-HR extractor with pump adjustable up to 500 psi
- 2000 W Heat N'Run external heater on its own 50 ft cord
- 12 in dual-jet S-bend stainless steel Glidemaster wand
- Teflon wand glide and 1200 psi brass angle valve
- 25 ft vacuum hose and high-pressure solution line