| Models | EDIC Galaxy 2000CX-HR |
| Solution Tank | 12 gal |
| Recovery Tank | 11 gal |
| Solution Pressure | Adjustable, 100-500 psi |
| Vacuum Motors | Dual 3-stage |
| Water Lift | 190 in |
| Airflow | 100 CFM |
| Electrical Draw | 17.1 A (20 A circuit required) |
| Voltage | 120 V |
| Power Cord | 50 ft, detachable |
| Heat | Heat-ready for EDIC Heat N'Run external heater |
| Baseplate | 1/4 in aluminum |
| Rear Wheels | 10 in, non-marking |
| Front Casters | 4 in, locking |
| Dimensions (H x L x W) | 35 x 31 x 18 in |
| Weight | 89 lb |
| Shipping Weight | 105 lb |
| Shipping Dimensions (H x L x W) | 36.5 x 31.5 x 19 in |
| Model Numbers | 2000CX-HR (machine only) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Galaxy 2000CX-HR 500 PSI Heat-Ready Portable Carpet Extractor
Our Take (from the SES Sales Team)
“The Galaxy 2000CX-HR is the high-pressure option in EDIC's 12-gallon Galaxy 2000 line, aimed at carpet cleaning contractors and in-house teams doing restorative work on heavily soiled carpet. The pump adjusts from 100 up to 500 psi, and dual 3-stage vacuum motors with 190 inches of water lift pull the water back out.
The heat-ready design is the other reason to look at it. You can run it cold today and later hang EDIC's Heat N'Run external heater on the built-in brackets for 200+ degree solution. Because the heater sits outside the body, a heater repair doesn't take the extractor out of service. Rear-mounted connections, large rear wheels and sides free of fittings make it easy to load in a van, and a standard 5-gallon bucket fits under the drain valve.
Plan your power before the first job: it draws 17.1 amps, EDIC requires a 20 amp circuit, and an added heater needs its own outlet on a separate circuit. This listing is the machine only, so you'll need a wand and hose. If 220 psi is enough, look at the 2000IX-HR.”
A 500 psi, 12-gallon portable extractor that is ready for an external heater.
The EDIC Galaxy 2000CX-HR is a 12-gallon portable carpet extractor with an 11-gallon recovery tank, a pump adjustable up to 500 psi, and dual 3-stage vacuum motors rated at 190 inches of water lift and 100 CFM. It runs on a single 50 ft detachable cord, draws 17.1 amps and requires a 20 amp circuit. This listing is the machine only.
The Galaxy 2000 is heat-ready: EDIC's Heat N'Run external heater mounts on built-in brackets at the back of the machine, keeping heat away from the motor compartment. The upright-mounted vacuum motors use an intercooler, the clamshell body opens for service, and the motor cavity is sealed. It has a 1/4-inch aluminum baseplate, 10-inch non-marking rear wheels, 4-inch locking casters and twist-lock cords.
Ready to work out of the box
What's included
- ✓Galaxy 2000CX-HR extractor
- ✓50 ft detachable power cord
Not included: Carpet wand, hose assembly and Heat N'Run heater, sold separately
Features
- ✓Pump adjusts up to 500 psi
- ✓Dual 3-stage vacuum motors with 190 in water lift
- ✓Heat-ready mounting for EDIC's Heat N'Run external heater
- ✓12 gal solution and 11 gal recovery tanks
- ✓Standard 5-gallon bucket fits under the drain valve
EDIC Galaxy 2000CX-HR 500 PSI Heat-Ready Portable Carpet Extractor
Specifications
| Models | EDIC Galaxy 2000CX-HR |
| Solution Tank | 12 gal |
| Recovery Tank | 11 gal |
| Vacuum Motors | Dual 3-stage |
| Water Lift | 190 in |
| Airflow | 100 cfm |
| Voltage | 120 V |
| Power Cord | 50 ft, detachable |
| Dimensions (H x L x W) | 35 x 31 x 18 in |
| Weight | 89 lb |
| Model Numbers | 2000CX-HR (machine only) |
Technical specs may include optional equipment that is not included with all units.
Talk it through with us
Not sure this is the right machine for your floors, building and shifts? Our equipment specialists can help you compare options. Call or chat with our team before you order.
