| Machine Height | 35" (89 cm) |
| Machine Length | 44" (112 cm) |
| Machine Width | 23" (59 cm) |
| Squeegee | 30" (76 cm) |
| Weight | 330 lbs (163 kg) |
| Shipping Weight* | Approx. 360 lbs (163 kg) |
*Shipping dims 56”x36”x48”; weight may change slightly due to varying skid weight.
Technical specs may include optional equipment that is not included with all units.
New Aztec ProScrub 20" Pad Assist Floor Scrubber
Our Take (from the SES Sales Team)
“The ProScrub is a no-frills 20 in walk-behind scrubber for people who want a machine that is easy to learn and easy to keep running. It scrubs and vacuums dry in one pass, and Aztec rates it at up to 16,000 sq ft per hour. The 24 V system gives roughly 3 hours of run time on a full charge, and this package uses AGM batteries, which are sealed and maintenance free, so no one has to water cells. The brush motor is 3/4 hp at 220 rpm with 65 lb of down pressure, and a 1/2 hp vacuum motor pulls water up through a reinforced 30 in steel squeegee. The 12 gal solution and 15 gal recovery tanks are sized for small and mid-size floors such as classrooms, offices, restrooms, retail and light industrial. Maintenance parts are easy to reach, the squeegee comes off without tools for transport, and the skirt hardware and casters are stainless steel. It is made in the USA.”
A simple 20 in walk-behind scrubber with AGM batteries
The Aztec ProScrub is a 20 in walk-behind automatic scrubber that wet scrubs and dry vacuums in one pass, covering up to 16,000 sq ft per hour (1,486 m²/h). A 12 gal (45 L) solution tank and a 15 gal (56 L) recovery tank suit small and mid-size floors.
This is the AGM battery package. Two maintenance-free AGM batteries power the 24 V system for approximately 3 hours of run time on a full charge.
Condition: New.
What you get
Scrub and dry in one pass
Why AGM batteries
Features
Rugged, economical, dependable
- ✓Easy access to key components for simple maintenance
- ✓Tool-less squeegee removal for transport
- ✓Stainless steel skirt hardware
- ✓Rugged stainless steel swivel casters
- ✓Pad holder or brush available
Productivity
How the ProScrub compares
| Method | Coverage |
|---|---|
| Damp mop and wringer | 4,545 sq ft/hr |
| 14 in micro-scrubber | 11,560 sq ft/hr |
| Aztec ProScrub | 16,000 sq ft/hr (1,486 m²/h) |
Comparison figures are the ones Aztec publishes from the ISSA Cleaning Times (October 2009).
Specifications
Aztec ProScrub 20 at a glance
| Models | ProScrub 20, AGM |
|---|---|
| Cleaning path | 20 in |
| Productivity | Up to 16,000 sq ft/hr (1,486 m²/h) |
| Solution / recovery tanks | 12 gal (45 L) / 15 gal (56 L) |
| Brush motor | 3/4 hp, 220 rpm |
| Scrubbing pressure | 65 lb (29 kg) |
| Vacuum motor | 1/2 hp, 24 V |
| Squeegee | 30 in (76 cm) reinforced steel |
| Batteries | 2 AGM, 24 V system, maintenance free |
| Run time | Approximately 3 hr |
| Height | 35 in (89 cm) |
| Length | 44 in (112 cm) |
| Width | 23 in (58 cm) |
| Machine weight | 330 lb (150 kg) |
| Shipping weight | Approx. 360 lb (163 kg) |
| Model Numbers | 030-20-AGM (ProScrub 20, AGM batteries) |
Technical specs may include optional equipment that is not included with all units.
Questions
Aztec ProScrub: common questions
How long does it run on a charge?
Aztec says the 24 V system delivers approximately 3 hours of run time when fully charged. Actual run time depends on the floor and how the machine is used.
Do the AGM batteries need watering?
No. AGM batteries are sealed and maintenance free.
How much floor can it clean?
Aztec rates the 20 in ProScrub at up to 16,000 sq ft per hour (1,486 m²/h).
Can it use a brush instead of a pad?
Yes. Aztec offers the ProScrub with a pad holder or a brush. Tell us your floor type and we will help you choose.
Not sure the ProScrub fits your floors?
Tell our team about the floor, the building and the shift, and we will help you decide if this is the right scrubber.
