New Advance ET610 100SC Portable Extractor
Our Take (from the SES Sales Team)
“The ET610 100SC is the single-cord version of the Advance ET610 portable extractor. It still has heat, with a 1,100 W heater, but everything runs off one plug, so it is easy to set up anywhere you can find an outlet. That makes it a good fit for in-house teams cleaning office carpet, classrooms and hallways who want heated extraction without hunting for a second circuit. The pressure regulator lets you dial spray pressure down for more delicate surfaces, and the 3-stage vacuum is rated at 140 in of water lift.
Choosing a package comes down to what you already own. The machine-only unit suits crews that have hoses and wands. The 15-SW package adds a 15 ft hose and a stainless steel wand so a first-time buyer can start cleaning right away. If you want the larger 1,750 W heater and can run two cords, step up to the ET610 100H.”
A heated, single-cord portable carpet extractor with a 3-stage vacuum
The Advance ET610 100SC is a portable carpet extractor for commercial carpet cleaning that runs on a single power cord. It pairs a diaphragm pump with a single 5.7 in, 3-stage vacuum motor rated at 140 in of water lift and adds a 1,100 W heater for heated extraction. A pressure regulator lets you adjust spray pressure for the surface you are cleaning, and the sealed system is built to extend vacuum motor life. Advance says heated cleaning lets you use less water, which means faster drying, less chance of shrinkage or soil wicking, and less need for chemical sanitizing. Advance built the ET610 with direct input from technicians who run extractors every day: the solution fill port sits away from the switch plate so spills stay clear of the electrics, a clamshell body opens for service, and a wand caddy, two front roller wheels and two handles make it easier to load, move and store between jobs.
Choose your configuration
Machine only or ready-to-clean package?
| Machine only | With 15 ft hose and wand | |
|---|---|---|
| What you get | ET610 100SC extractor | ET610 100SC extractor, 15 ft hose and stainless steel single-bend wand |
| Best for | Crews that already own hoses and wands | A first extractor that can go to work right away |
| Packages here | 56105294 | 56105421 |
Reading the model numbers: Nilfisk lists the machine as ET610 100SC (56105294) and the hose-and-wand package as ET610 100SC-15-SW (56105421). The machine itself is the same in both, with the same pump, 3-stage vacuum, heater and pressure regulator, so the only difference is whether the hose and wand come in the box. The ET610 100H is sold on its own page.
Features:
- 1,100 W heater for heated extraction on a single power cord
- Pressure regulator lets you dial in spray pressure for the surface
- Easy-fill solution tank port sits away from the switches and controls to reduce maintenance issues
- Sloped recovery tank design empties completely
- Transport handle, tank handle, cord wraps and oversized rubber-grip rear wheels make it easy to move between jobs

Advance ET610 extractor

Cleaning classroom carpet

Recessed switch panel
ET610 100SC
Specifications
| Models | Machine only | With 15 ft hose and wand |
| Pump | Diaphragm, 100 psi | |
| Vacuum Motor | Single 5.7 in, 3-stage | |
| Water Lift | 140 in | |
| Heater | 1,100 W | |
| Power Cord | Single | |
| Vacuum Shutoff | Ball float | |
| Pressure Control | Adjustable pressure regulator | |
| Hose | Not included | 15 ft |
| Wand | Not included | Stainless steel, single bend |
| Weight | 87 lb (39 kg) | |
| Dimensions (L x W x H) | 40.5 x 21 x 42 in (103 x 53 x 107 cm) | |
| Model Numbers | 56105294 | 56105421 |
Technical specs may include optional equipment that is not included with all units.

