New Advance ET610 100H Portable Extractor

Our Take (from the SES Sales Team)

“The ET610 100H is the version of the Advance ET610 to pick when hot water matters to the job. Its 1,750 W heater runs off a second power cord, so the heater, pump and 3-stage vacuum all get the power they need. Advance says cleaning with heat lets you put down less water, so carpets dry faster and there is less risk of shrinkage or wicking. The pressure regulator lets you turn the spray down for more delicate surfaces.

Picking a package is simple. If you already have good hoses and a wand, the machine-only unit is all you need. If this is your first extractor, or you are setting up a second crew, the 15-SW package adds a 15 ft hose and a stainless steel wand so it can go to work the day it arrives. If you would rather run on one cord and can live with a smaller heater, look at the ET610 100SC.”

A heated, dual-cord portable carpet extractor with a 3-stage vacuum

The Advance ET610 100H is a portable carpet extractor for commercial carpet cleaning. It pairs a diaphragm pump with a single 5.7 in, 3-stage vacuum motor rated at 140 in of water lift, and its 1,750 W heater runs on a dual power cord setup. The 100H is CRI Bronze certified. A pressure regulator lets you adjust spray pressure for the surface you are cleaning, and the sealed system is built to extend vacuum motor life. Advance says the high-heat system lets you use less water at higher heat, which means faster drying, less chance of shrinkage or soil wicking, and less need for chemical sanitizing. Advance built the ET610 with direct input from technicians who run extractors every day: the solution fill port sits away from the switch plate so spills stay clear of the electrics, a clamshell body opens for service, and a wand caddy, two front roller wheels and two handles make it easier to load, move and store between jobs.

Reading the model numbers: Nilfisk lists the machine as ET610 100H (56105293) and the hose-and-wand package as ET610 100H-15-SW (56105423). The machine itself is the same in both, with the same pump, 3-stage vacuum, heater and pressure regulator, so the only difference is whether the hose and wand come in the box. The ET610 100SC is sold on its own page.

Features:

• 1,750 W heater for heated extraction on a dual-cord setup
• Pressure regulator lets you dial in spray pressure for the surface
• Easy-fill solution tank port sits away from the switches and controls to reduce maintenance issues
• Sloped recovery tank design empties completely
• Transport handle, tank handle, cord wraps and oversized rubber-grip rear wheels make it easy to move between jobs

Advance ET610 extractor

Cleaning classroom carpet

Recessed switch panel

Technical specs may include optional equipment that is not included with all units.

With Selected Items: