| Models | Adgressor 3220C |
| Scrub Path | 32 in (81 cm), cylindrical |
| Squeegee Width | 36.6 in (93 cm) |
| Productivity (theoretical max) | 56,320 sq ft/hr (5,232 m²/hr) at 4.0 mph; 35,200 sq ft/hr (3,270 m²/hr) at 2.5 mph |
| Solution Tank | 42 gal (157 L) |
| Recovery Tank | 42 gal (157 L) |
| Brushes | (2) cylindrical, 5.75 x 31 in (14.6 x 79 cm) |
| Brush Motors | (2) 0.75 hp (560 W), poly-V belt drive |
| Brush Speed | 900 rpm |
| Brush Pressure | Programmable, 3 settings, up to 250 lb (113 kg) |
| Vacuum Motor | 0.75 hp (560 W), 3-stage |
| Drive System | 1.5 hp (1,100 W) with gear transmission, band brake and dynamic braking |
| Speed | Up to 4.5 mph (7.3 km/h) forward |
| Gradeability | Transport 20% (11.5°); scrubbing 8% (4.6°) |
| Minimum Turn-around Aisle | 63 in (160 cm) |
| Voltage | 36 V (six 6 V batteries) |
| Battery Options | 310 Ah or 420 Ah wet, or 312 Ah AGM |
| Charger Options | Shelf or on-board |
| Solution Control | Smart Solutions |
| EcoFlex Dilution Ratios | 32:1, 50:1, 64:1, 100:1, 128:1, 150:1, 200:1, 256:1, 300:1 |
| EcoFlex Cartridge | 1.25 gal (4.75 L), refillable |
| Sound Level | 68 dBA at operator's position |
| Frame Dimensions (L x W x H) | 61 x 32 x 53 in (155 x 82 x 135 cm) |
| Weight | 657 lb (298 kg), machine only |
| Model Numbers | 56390968 |
Technical specs may include optional equipment that is not included with all units.
New Advance Adgressor 3220C 32" Cylindrical Rider Scrubber with EcoFlex
Our Take (from the SES Sales Team)
“The Adgressor 3220C is a 36-volt rider scrubber built around a 32-inch cylindrical deck. Two cylindrical brushes spin at 900 rpm, which makes this deck a good choice for textured, grouted or uneven floors where a disc deck can skip over low spots.
Capacity is where it earns its place. It carries 42-gallon solution and recovery tanks, a 36.6-inch squeegee and programmable brush pressure up to 250 pounds, and Advance rates it for up to 56,320 square feet per hour at 4 mph (theoretical). It still turns within a 63-inch aisle, so it fits warehouse aisles and back-of-house corridors.
The EcoFlex system is the other reason to look at this model. Operators can run water only, ultra-low detergent, standard detergent or a burst of power for heavy soil, with nine dilution ratios from 32:1 to 300:1 drawn from a refillable cartridge. That makes it easier to match chemical use to the job instead of mixing a full tank.”
“I've purchased Floor Scrubbers for general commercial use from Southeastern Supply over the last 5 years. About a dozen units each year.” — Kirk T., Google review
Large-capacity cylindrical rider with EcoFlex.
The Advance Adgressor 3220C is a 36-volt battery rider scrubber with a 32-inch (81 cm) cylindrical scrub path, a 36.6-inch squeegee, and 42-gallon (157 L) rotomolded polyethylene solution and recovery tanks. A steel chassis and metal bumpers stand up to tough operating environments.
Two 0.75 hp brush motors turn the cylindrical brushes at 900 rpm, with programmable brush pressure up to 250 lb (113 kg). The 1.5 hp drive reaches programmable speeds up to 4.5 mph and climbs 8% grades while scrubbing. Batteries and chargers come in wet or AGM and shelf or on-board configurations, so ask your sales rep which setup ships with this unit.
Ready to work out of the box
What's included
- ✓EcoFlex system with 1.25-gal (4.75 L) refillable detergent cartridge
- ✓Smart Solutions solution control
Features
- ✓32-in cylindrical scrub path with brushes at 900 rpm
- ✓42-gal solution and recovery tanks
- ✓EcoFlex system with four cleaning modes and nine dilution ratios
- ✓QuickChange tool-free deck interchange and One-Touch controls
- ✓Turns within a 63-in (160 cm) aisle
Advance Adgressor 3220C 32" Cylindrical Rider Scrubber with EcoFlex
Specifications
| Models | Adgressor 3220C |
| Scrub Path | 32 in (81 cm), cylindrical |
| Squeegee Width | 36.6 in (93 cm) |
| Productivity (theoretical max) | 56,320 sq ft/hr (5,232 m²/hr) at 4.0 mph; 35,200 sq ft/hr (3,270 m²/hr) at 2.5 mph |
| Solution Tank | 42 gal (157 L) |
| Recovery Tank | 42 gal (157 L) |
| Brush Speed | 900 rpm |
| Brush Pressure | Programmable, 3 settings, up to 250 lb (113 kg) |
| Voltage | 36 V (six 6 V batteries) |
| Sound Level | 68 dBA at operator's position |
| Weight | 657 lb (298 kg), machine only |
| Model Numbers | 56390968 |
Technical specs may include optional equipment that is not included with all units.
Talk it through with us
Not sure this is the right machine for your floors, building and shifts? Our equipment specialists can help you compare options. Call or chat with our team before you order.
