| Models | EDIC Galaxy Pro 2700CX-HRH-TK Kit |
| Extractor | Galaxy Pro 2700CX-HR, heat-ready |
| Solution / Recovery Tanks | 17 gal / 15 gal |
| Solution Pressure | Adjustable, up to 500 psi |
| Vacuum Motors | Dual 3-stage, 190 in water lift |
| Airflow | 91 CFM |
| Extractor Electrical Draw | 17.1 A (20 A circuit required) |
| Heater | Heat N'Run external, 2000 W, 16.6 A |
| Heater Power Cord | 50 ft, detachable |
| Heat-Up Time | 1.5 to 3 minutes |
| Wand | Triton, dual stainless steel jets, for 500 psi extractors |
| Wand Weight | 6.5 lb |
| Wand Construction | Aircraft aluminum tube, brass spray tube, UHMW glide |
| Wand Valve Rating | 1200 psi |
| Hose Assembly | 25 ft vacuum hose and high-pressure solution line |
| Extractor Power Cord | 50 ft, detachable |
| Extractor Dimensions (H x L x W) | 38 x 31 x 20 in |
| Extractor Weight | 104 lb |
| Model Numbers | 2700CX-HRH-TK (Galaxy Pro 2700CX-HR extractor, 2000 W Heat N'Run heater, Triton wand, 25 ft hose assembly) |
Technical specs may include optional equipment that is not included with all units.
New EDIC Galaxy Pro 2700CX-HRH-TK 500 PSI Carpet Extractor Kit with Heater and Triton Wand
Our Take (from the SES Sales Team)
“This kit is EDIC's ready-to-work package built around the 17-gallon Galaxy Pro 2700CX-HR, aimed at carpet cleaning contractors and facility crews who want hot-water extraction from a portable. It combines the 500 psi extractor with a 2000-watt Heat N'Run external heater, a Triton carpet wand and a 25 ft vacuum hose and solution line.
The Triton is the reason to choose this kit over the Glidemaster version. EDIC puts its total weight at 6.5 lb, it rides on a low-friction UHMW glide, and its dual jets are laid out so the two spray patterns don't overlap. The heater hangs on the back of the extractor, keeps its heat out of the motor compartment, and comes up to temperature in about 1.5 to 3 minutes.
Plan your power before the first job. The extractor draws 17.1 amps and EDIC calls for a 20 amp circuit, and the heater must plug into a separate outlet on a separate circuit. If your operators prefer a traditional stainless wand, the 2700CX-HRH-WK kit uses a Glidemaster instead.”
A complete 500 psi hot-water carpet cleaning kit built around the 17-gallon Galaxy Pro.
The EDIC 2700CX-HRH-TK kit combines the Galaxy Pro 2700CX-HR heat-ready portable extractor with a 2000-watt Heat N'Run external heater, a Triton carpet wand and a 25 ft vacuum hose and high-pressure solution line. The extractor has a 17-gallon solution tank, a 15-gallon recovery tank, a pump adjustable up to 500 psi, and dual 3-stage vacuum motors with 190 inches of water lift.
The Heat N'Run heater mounts on the extractor's built-in brackets and runs on its own 50 ft power cord. The Triton wand weighs 6.5 lb and has an aircraft aluminum wand tube, a UHMW glide, a brass spray tube, stainless steel dual jets and a 1200 psi valve. The extractor weighs 104 lb, draws 17.1 amps and requires a 20 amp circuit.
Includes:
- Galaxy Pro 2700CX-HR heat-ready extractor
- Heat N'Run 2000 W external heater with 50 ft power cord
- Triton carpet wand with built-in glide
- 25 ft vacuum hose and high-pressure solution line
- 50 ft detachable extractor power cord
Not included: Upholstery tool and hose and wand rack kit, sold separately
Features:
- Galaxy Pro 2700CX-HR extractor with pump adjustable up to 500 psi
- 2000 W Heat N'Run external heater on its own 50 ft cord
- Triton dual-jet carpet wand, 6.5 lb, UHMW glide
- 25 ft vacuum hose and high-pressure solution line
- 17 gal solution and 15 gal recovery tanks