Directions on Use

Prepare a use solution of 4 oz. of this product per gal. of water (488 ppm) for effectiveness against designated public health viruses on the label. **For HBV and HCV use a 6 oz. per gal. (730 ppm) prepared use solution.

1. Pre-clean heavily soiled areas.
2. Apply use solution to disinfect hard, non-porous surfaces with a sponge, brush, cloth, mop, by immersion, auto scrubber, mechanical spray device, hand pump, coarse pump or trigger spray device. For spray applications, spray 6-8 inches from surface. Do not breathe spray.
3. Treated surfaces must remain wet for 10 minutes.
4. Allow to air dry. Rinsing of floors is not necessary unless they are to be waxed or polished.
5. Prepare a fresh solution daily or when visibly dirty